Infrared Beam Detector for Sliding Gate Motors 12/24V AC/DC Auto-
Aligning 15m Sensing
The self - aligning photocell is a safety device comprising
modulated infrared Transmitter and Receive. Breaking the path of
the beam causes a switch in the status of the electric contact on
the Receive.
Complies with the following directives:
IEC335.1 and UN18612.
| Item | Details |
|---|
| Power supply: | 12/24V AC/DC |
| Absorbed current: | >25mA |
| Sensing range: | <15m |
| Obstacle detection time: | 1sec |
| Operating temperature: | - 10℃/50℃ |
| Type of alignment: | automatic |
| Installation: | wall - mounting |
In order to ensure optimum working efficiency, the Receive and
Transmitter should be properly aligned.
The best installation height should be more than 20cm and the
distance between RX and TX should be more than two meter. Keep the
device vertical and on a line.
Ensure correct alignment by checking the LED on the Receiver.When
device is on a line, the LED will go out.
Warning! Incorrect installation or use of product could cause
serious personal injury.
Any repair should be performed by qualified person.
1 = 0V AC/DC -
2 = 12/24VAC/DC +
1 = 0V AC/DC -
2 = 12/24VAC/DC +
3 = NO
4 = COM
5 = NC
For more details about our high-quality infrared photoelectric
sensor for barrier gates, please feel free to contact us.
- Contact Person: Zoe Lee
- Mobile: +86 135 3781 8437
- Email: zoe@wonsunbarrier.com
- Wechat: Zoelee0315
- WhatsApp: +86 135 3781 8437
- Company Name: Shenzhen Wonsun Machinery & Electrical Technology Co., Ltd
- Address: 1st Floor, Zhigu, No. 2 - 10, South Jinlong Avenue, Shahu
Community, Biling Street, Pingshan District, Shenzhen, China.
(Postal Code: 518118)
We are committed to providing high-quality products and excellent
services to meet your needs. If you have any questions or need
further assistance, please don't hesitate to get in touch with us.
