Features
1. Impeller mounted directly on the long axis of the motor, pump
and motor bearing arrangement is reasonable, pump operation can
effectively balance the radial and axial loads, thus ensuring the
smooth operation of the pump, small vibration and low noise.
2. Mechanical shaft seal, use of imported titanium alloy seal ring,
medium and high temperature mechanical seal with carbide materials,
anti-wearing no leakage.
3. Easy installation and maintenance, no need to open pipeline
system, the rotation parts of the pump can be pulled out by
removing the screws on the pump.
4. According to the needs of flow and head, the pump can be used in
series or parallel operation mode.
Working Conditions
1. Suction pressure ≤ 1.0MPa, the maximum pump system working
pressure≤ 1.6MPa, the pump hydrostatic test pressure ≤ 2.5MPa.
2. Ambient temperature <40 º C, relative humidity≤ 40%.
3. Content of solid particles in the medium per unit volume does
not exceed 0.1%, particle size <0.2mm.
Application
ISW type centrifugal pump for conveying water or other liquids that
physical and chemical properties similar to water, like
industrial and urban water supply and drainage, high-rise building
pressurized water, garden irrigation, fire boost, long-distance
transport , HVAC refrigeration cycle, bathroom and heating
equipment for pressurized water circulation, temperature <80 ºC.
