Heavy-Duty Rexroth Piston Pump Cast Iron Components for Press Machine 250 cc/rev

Heavy-Duty Rexroth Piston Pump Cast Iron Components for Press Machine 250 cc/rev

Features:

1. Compact axial piston pump with high power-to-weight ratio.

2. Fast‑response electro‑hydraulic servo actuator.

3. Drive shaft absorbs axial/radial loads.

4. Modular mounting flange standard (ISO 3019/2).

5. Efficient energy conversion.

6. Multiple mounting angle options (0°/90°/180°/270°).

7. High-precision fow control.

8. Aluminum alloy or ductile iron housing materials.

9. High-rigidity housing for stability.

10. Optimized oil chamber design to minimize leakage.

Technical data:

Specifications:

Applications:

Competitive Advantage:

1. For large‑scale hydraulic installations, the A4VSO piston pump’s external cooler loop interface enables integration into centralized heat‑exchange circuits, facilitating modular thermal management and reducing piping complexity; this flexibility simplifies system layout for heavy industrial plants and multi‑pump skids, ensuring uniform temperature control across multiple hydraulic power units and supporting predictive maintenance by centralizing coolant filtration and monitoring.

2. With four selectable mounting orientations—0°, 90°, 180°, and 270°—the A4VSO axial piston pump offers unmatched installation flexibility, allowing hydraulic system designers to minimize piping runs and reduce manifold complexity; this adaptability not only cuts fabrication costs and assembly time but also enhances service access for maintenance operations, making the pump highly attractive for compact mobile equipment frames, tight press modules, and retrofit projects where space constraints demand creative hydraulic packaging solutions.

3. Offering both lightweight aluminum alloy and high‑strength ductile iron housing options, the A4VSO pump caters to diverse application requirements—from mobile machinery where weight reduction is critical, to stationary industrial presses where structural rigidity and longevity are paramount; this material flexibility allows OEMs to optimize the pump’s power‑to‑weight ratio or its mechanical robustness based on specific design priorities, ensuring the best balance of durability, corrosion resistance, and performance for each use case.

The Analysis For Rexroth A4VSO Piston Pump Common Breakdown:

1. Suction line cavitation causing flow interruption: Air ingress through loose fittings, undersized suction lines, or low reservoir levels can induce vapor cavitation, resulting in momentary flow starvation and pressure drop. Inspecting and sealing all suction line connections is critical. Suction piping should be at least 1.5 times the pump’s maximum inlet diameter, and reservoir levels maintained above the inlet to prevent air entrainment. These measures ensure continuous hydraulic fluid supply and protect the axial piston pump from damage due to repeated suction‐line cavitation events.

2. Journal bearing wear increasing internal leakage: The hydrostatic film journals between the crankshaft and cylinder housing bear heavy loads at high pressures. Poor lubrication or contaminated oil leads to microscopic wear, thinning the lubricating film and raising internal leakage. Symptoms include declining pump performance and gray sludge formation in the oil. Increasing filtration cleanliness and applying wear‑resistant nanocoatings to crank surfaces effectively slow degradation and preserve volumetric efficiency, ensuring the axial piston pump sustains reliable hydraulic power delivery under demanding operating conditions.

3. Electrical noise on control interface: When the electro‑hydraulic proportional interface experiences high‑frequency electromagnetic interference or poor grounding, control signals can jitter, causing valve spool misalignment and inaccurate flow or pressure settings. Ensuring solid system grounding and applying shielded, filtered signal wiring are essential. For severe EMI/EMC environments, optocoupler isolation or redundant signal lines may be required to guarantee precise control of the axial piston pump. Proper electrical design prevents erratic pump behavior and maintains the hydraulic pump’s accuracy in automated control applications.

Shaoyang Victor Hydraulic Co., LTD. (formerly Shaoyang Hydraulic Parts factory), founded in 1968, is one of the three pillar enterprises of china's hydraulic industry directly under the former Ministry of Machinery industry, the national fixed-point production of hydraulic components, cylinders, complete sets of hydraulic system demonstration enterprises. is china's high pressure piston pump manufacturing pioneer.

The company brings together advanced manufacturing processing machine tools and a variety of testing and inspection equipment, and the products have high reliability and consistency. Adhere to independent innovation, excellence, cylinder, high-pressure piston pump, system in many fields has been a batch supporting industry leader enterprises. Shao Ye independent innovation research and development products are the National Development and Reform Commission, the Ministry of industry and information Technology, the Ministry of Science and Technology and other ministries key support import substitution projects, at the same time is the national high-tech enterprise, the national intellectual property advantage enterprise, the national specialized, refinement, differential and innovation "Little Giant" enterprise.

At present, Shao Ye independent core products and solutions are widely used in water conservancy, military, lithium electricity, metallurgy, forging, pile foundation, Marine engineering, construction machinery and other industries and a number of national major projects.