How it Works:
| The combination switch consists of a moving contact (moving contact
piece), a static contact (static contact piece), a rotating shaft,
a handle, a positioning mechanism and a housing. The moving
contacts and static contacts are respectively stacked between
several layers of insulation pads, and each is attached with a
terminal connecting the line. When the handle is turned, the moving
contact of each layer rotates with the square rotating shaft, so as
to realize the circuit on and off control. There are 3 pairs of static contacts in the interior of the
combination switch, respectively separated by 3 layers of
insulation board, each attached to the wiring pile connecting the
line, 3 moving contacts are insulated from each other,
corresponding to their own static contacts, set on the common
insulation rod, one end of the insulation rod is equipped with an
operating handle, the handle rotates 90 degrees each time, you can
complete the opening and closing or switching between the 3 groups
of contacts. The switch is equipped with a quick breaking spring to
accelerate the breaking speed of the switch. The combination switch refers to a switch that is often introduced
as a power supply in the electrical control line, which can be used
to directly start or stop the low-power motor or make the motor
reverse and reverse |
| Functions: | The car combination switch is a combination of some parts of the
car equipment, and it is a multi-functional combination switch, and
the car combination switch is a motor control line, a switch often
introduced as a power supply, can be used to directly start or stop
the small Gree motor or make the motor rotate positively and
negatively. Therefore, the automobile combination switch also plays
the corresponding role of starting and closing the power switch
equipment. And the car combination switch is usually installed on
the steering column under the steering wheel, there are left and
right sides for control, and this is to facilitate the driver to
use and operate the car combination switch is a switch, its use is
mainly used for electrical equipment through the electrical control
system connected to each other, and then to achieve different
function conversion and open and close, And the combination switch
has a series of roles such as lighting switch, warning, light
signal, and the applicable environment in the day and night as long
as the combination switch is needed, the car block switch can play
a corresponding role. Car combination switch has certain action characteristics, such as
the gear characteristics, the gear is only divided into several
levels of the force is different, as well as the characteristics of
the conversion force and speed characteristics, speed
characteristics is the equipment controlled after the switch, there
is a corresponding fast and slow speed competition, and even
anti-interference ability, anti-interference ability can choose to
open the wiper, This is what can be anti-interference, because
sometimes rain will affect the windshield to affect their own
things, so to turn on this to prevent interference. Car combination switch is often used, and used in the dark, in
fact, the main switch is particularly many, so for the car
combination switch, we must maintain a good state, protect the use
of car trigger switch, especially the car combination switch,
sometimes failure and other situations, this time it is necessary
to check or replace in time, This helps the driver with some safety
features while driving. |
