KGZ-NGL-096-273 Zirconia Oxygen Sensor Aerospace Oxygen Monitoring High-temperature Industrial Furnaces

KGZ-NGL-096-273 Zirconia Oxygen Sensor

1. Overview:

• A flange-mounted zirconia oxygen sensor from UK-based SST, designed for sampling chambers. Favored by aerospace clients and applications requiring high-temperature and high-pressure operations.

2. Operating Conditions:

• Working Voltage: 4.35VDC ± 0.1VDC (1.85A)
• Standby Voltage: 2VDC (0.85A)
• Permissible Gas Temperature: -100°C to +250°C
• Gas Flow Rate: 0–10 m/s

3. Electrical Characteristics:

• Pump Impedance at 700°C: <6 kΩ
• Output Signal: Oxygen partial pressure measurement range: 2 mbar–3 bar, accuracy: ≤5 mbar
• Calibration-free design: No reference gas required; simple single-point calibration feasible in any known gas (including fresh air).

4. Temperature Characteristics:

• Internal Operating Temperature: 700°C
• Recommended Preheating Time: 60–100 seconds before sensor operation
• Output Stability Time: Stabilizes within 180 seconds after startup

5. Mechanical Characteristics:

• Repeated Allowable Acceleration: 5g
• Incidental Allowable Acceleration: 30g
• Termination: 0.4m cable with Molex connector

6. Other Features:

• Response Time (T90): <4 seconds
• Measurement Technology: Closed-loop measurement system. The sensor generates a "heartbeat" signal during continuous O₂ level monitoring, providing immediate fault warnings.
• Service Life: Up to 10 years (application-dependent), using non-depletable sensor cell technology.
• Structure: Zirconia (ZrO₂) sensing element, full stainless steel construction, flange-mounted, pin terminal.
• Environmental Adaptability: Operable in high-temperature, humid, and pressurized environments. Its robust structure allows use in harsh conditions, with no need to replace electronics at the end of the sensor's life.

Applications:

• Aerospace oxygen monitoring
• High-temperature industrial furnaces
• Combustion efficiency optimization systems
• Pressure vessel environment detection

Yijiajie Electronics is a full range of silicon pressure sensors from the United States, FREESCALE/, GE, MEAS, SMI, and a full range of sensing and control products from the United States pressure, temperature and humidity, gas flow, current, Hall effect, etc., Japan HAMAMATSU flame, UV sensors, photodiodes, Japan FIGARO, UK CITY, ALPHASENSE full range of semiconductors, catalytic, electrochemical gas sensors, French HUMIREL/MEAS humidity sensors and other international well-known companies authorized agents or distributors, to provide customers with product information, products Solutions, product selection, supply guarantee and logistics services, etc.