New technology Generation Two HP Servo Direct Drive Water Jet Pump 435MPA

Generation two HP servo direct drive pump for waterjet cutting pump

Waterjet servo direct drive pump

Performance and parameters
MODEL :WMT SDD II 40
MAX PRESSURE :435MPa
Continuous working pressure :370-380MPa
Max orifice diameter :0.43mm
Flow rate :5.6 l/min
Inlet water pressure :0.4MPa
Motor power :30KW
Dimension :1800mm X 900mm X 1200mm
Booster and piping system (high-pressure cylinder, plunger rod, high-pressure seal, low-pressure seal, high-pressure piping, check valve, etc
Dual-row filtration system (5 Micron, 1 micron, in series)
Fully automatic servo control system, output pressure control mode
Intelligent start-stop function
Automatic shutdown for overpressure and automatic protection for underpressure
Power supply:380VAC, 50Hz , 3 Phase

Power is only 30kw, which can save you 60% to 70% of the cost

servo direct drive pump represents a new generation of high-efficiency, energy-saving ultra-high pressure pump, which is the first large R&D in China. Servo motor driven direct drive intensifier system.

WAMIT SECOND GENERATION DIRECT DRIVE PUMP CUTTING SPEED SHEET

material	thickness(mm)	Cutting pressure	Max cutting speed (mm/min)	Cutting result
Carbon steel	6	370	850
	8	370	650
	10	370	550
	16	370	300
	20	370	220
	30	370	140
	75	370	40
	100	370	22
	125	370	10
Titanium alloy	10	370	800
	20	370	260
	45	370	100
	100	370	26

aluminum	6	370	2500
	8	370	1800
	20	370	650
	30	370	350
	40	370	260
Stainless steel	6	370	850
	8	370	650
	13	370	500
	16	370	300
	56	370	45
glass	5	370	7000
	8	370	3000
	12	370	1600
	15	370	900
	19	370	650

ADVANTAGE OF WAMIT SECOND-GENERATION DIRECT DRIVE PUMP:
The second-generation WAMIT servo direct-drive pump adopts world most advanced technology and processes . Whether in terms of performance, quality, functionality or operation, there have been significant improvements. The features are summarized as follows::
1,Performance is efficient:The maximum pressure can reach 435MPa, with a continuous working pressure of 370-380MPa and pressure fluctuation range of ±0.5MPa. This continuous and stable high-pressure output increases the cutting speed by 50%-60% compared hydraulic intensifer pumps of the same pressure, significantly enhancing production efficiency.
2,Intelligent maintenance:This product is equipped with a remote control system, which can assist users with remote after-sales service, avoiding losses caused by improper settings.
3,more flow rate:The largest orifice diameter is 0.43mm, with a flow rate of 5.6L/min, allowing customers to achieve higher and quality when making precise cuts.
4,longer using life of easy-wear spare parts:The second-generation direct-drive pump adopts world-leading hard-sealing technology, greatly extending the service life of consumable parts, reducing the frequency of maintenance and lowering the usage cost..
5,Simplified maintenance:Adopting the new integrated assembly process, the maintenance time is reduced by 50%, making maintenance simpler and more convenient.
6,Easy to operate:Equipped with an HD touch screen, the parameters such as pressure, duration, mode, and speed are intuitively displayed, making adjustments simpler and convenient, enhancing the operational experience and work efficiency..
7,Automatic water supply:Equipped with an automatic water supply system, it monitors the water level in real time. If there is no continuous water supply, the system will emit a buzzing alarm; if the water level is too low, it will automatically shut down to avoid equipment damage caused by human error, thus further enhancing the reliability the equipment..
8,Intelligent alarm system :Configure multiple intelligent alarm systems, including servo driver alarm, water supply pressure alarm, maintenance alarm, water level alarm, oil pressure alarm, etc. alarm information will be displayed in real-time on the touch screen to help users quickly identify and resolve issues..
9,Digital platform system:Built-in remote digitalization platform system, users can monitor the operation status of the equipment in real time through mobile and web terminals. The system can statistics the daily operation time, working time, power consumption and income of the equipment, and warn of equipment problems in advance to ensure long-term stable operation of the machine.
10,Energy saving and electricity conservation :The power is only 30kw, compared to the hydraulic intensifier pump with the same flow and pressure (the power of the same hydraulic is 75kw), its energy efficiency is greatly improved. This advantage not only greatly reduces operating costs but also reduces energy consumption, meeting the modern manufacturing industry requirements for energy saving and emission reduction..
11,Environmental protection:It replaces traditional hydraulic systems, reduces the use of hydraulic oil, and is equipped with self-cooling functions, effectively reducing equipment pollution; low noise (noise does not exceed 75dB), the noise level is equivalent to that of ordinary diesel cars, and it is more environmentally friendly
12,Good design appearance:In addition to the rationality of its own structural design, the second-generation direct-drive pump, due to the absence of a hydraulic system, avoids problem of hydraulic oil leakage, eliminating oil pollution and making the equipment appearance cleaner and more tidy..

Specifications:

Cutting Accuracy(mm)	0.005
Voltage	380/220/400VAC, 50Hz ,3 phase
Rated Power	30KW
Dimension(L*W*H)	1800*900*1200mm
Weight (KG)	800KG
water inlet pressure	0.4MPA
Max. water discharge	5.6L/min
Max. diameter of orifice	0.43MM
Continuous operating pressure	370-380Mpa
Max. operating pressure	435MPa(63000 psi)
Pump type	direct drive pump
Model	WMT SDD II 40

SHANDONG WAMI CNC TECHNOLOGY CO.LTD is the professional manufacturer of water jet cutting machine and spare parts for all Chinese brand water jet cutting machine . our factory is located in JINAN city, SHANDONG province, China.

we have 420Mpa intensifier pump, 600Mpa intensifier pump ,60000psi direct drive pump and 420mpa with dual intensifier pump, we also can provide 3 axis , 5 axis with 10 degree and dynamic 5 axis with 60 degree cutting head water jet cutting machine, pure water cutting and abrasive sand cutting. our machines are with excellent quality - efficient and accuracy, economical investment with low initial cost and low maintenance cost to our customers. All the machinery delivered by us come with first class after-sale service. all machines are with one-year warranty of main parts, whole-life after-service for the entire machine.

We can supply water jet cutting machine according to your requests,from the cutting table size to the special design . Especially our new design of automatic abrasive sand removing system bring convenience for glass and marble factories. this system can fit for any brand water jet cutting machine. you needn't stop the machine while it is working.

our new FLOW type cutting head can improve you 10% cutting efficiency, and our new technology can make the machine moving speed to 30-50m/min so that reduce you 15%-50% cutting cost according to the materials.

Until now We have expanded our market to North America, Australia, Southeast Asia, Central Asia and the Middle East. And establish a good relationship with our customers in Russia, Argentina, America, Canada, UK, Chile, South Africa, Ecuador,Kuwait, Hungary , Saudi Arabia , Vietnam, Turkey,Mexico,Malaysia ,Australia and other countries and regions.

we now have after-service department in America, Russia, South Africa, Ecuador,UK, Argentina, Chile.Mexico,Australia,Saudi Arabia,Malaysia.Vietnam.

We takes "customer first, reliable quality, honest and faithful, good team work" as our consistent business principle. With the strict management and continuous improvement, we can supply the best way of cutting by water jet. please don't hesitate to contact us if you want to know more!