Transparent Self-Healing Silicone Gel for Encapsulating and Potting Electrical Components and Enclosures
GEL 6605A/B is a two-liquid type clear rugged silicon gel gel that cures to form a cushioned elastic soft
material. It is designed to insulate circuit boards from moisture and other harmful contaminants and to provide insulation against high voltages. Another use is to provide stress relief to protect circuit u and interconnectors from high temperature and mechanical stress.
Features
l 1:1 addition molding high elasticity
l Excellent flexibility, eliminates mechanical stress
l Very low oil permeability after curing, excellent resistance to toxicity
l High temperature electrical insulation is excellent, to provide protection against high pressure
l Excellent aging resistance and weather resistance
l Excellent waterproof, anticorrosive, moisture-proof, chemical medium resistance
Typical Application
l Power modules, such as thyristors, l Solid state relays, diode packages
l Cable junction box filling
l Waterproof junction box fill
l Motor lead box
l Electric vehicle control box
∎Technical Data Table
| | GEL 6605 Transparent | GEL 6605 Light blue | | | Component A | Component B | Component A | Component B | | Appearance | Colorless clear | Colorless clear | Light blue | | Viscosity,25℃ CPS | 1,000±200 | 1,000±200 | 500-700 | 450-650 | | Specific gravity, g/cm3 | 0.99±0.02 | 0.99±0.02 | 0.99±0.02 | 0.99±0.02 | | Mixing ratio | A: B = 100:100 | A: B = 100:100 | | Viscosity mPa.s after mixing | 1100±200, 25℃ | 500±200, 25℃ | | Operating time after mixing | 15 ± 5 minutes 25℃ | 7 ± 3 minutes 25℃ | | Initial curing time | 40-60 mins 25℃ | ≤20 minutes 25℃ | | Hardening conditions | 24 hours at 25℃ | 24 hours, 25℃ | | Appearance | Clear gel | Blue clear gel | | Hardness Shore 00 | 35± 5 | | | Cone penetration 1/ 10mm | 80, awl 1# 150g | 260, awl 1# 150g 60, awl 3# 9.38g | | Dielectric strength (Kv/mm) | 25 | 25 | | Volume resistance (Ω·cm) DC500V | 1.0 × 1014 | 1.0 × 1014 | | Loss factor ( 1 MHz) | 0.009 | 0.009 | | Dielectric constant ( 1 MHz) | 2.8 | 2.8 | | Use temperature range | - 60 ∽ 200℃ | - 60 ∽ 200℃ | |
∎Packing Specification
●Part A—10 KG/Bucket
●Part B—10 KG/ Bucket.
∎Transport &Storage
● When stored at or below 25°C in the original unopened containers, this product has a usable life of 12 months from the date of production. Sampling test is necessary for products which exceed shelf life before taking use.
It’s non-dangerous goods, can be transported as normal chemicals, CAUTION leakage during transport.
.∎Directions for Use
- Mix Part A and Part B by 1:1 mass ratio, after evenly mixed, pouring directly into the components or modules as per requirements.
- Still the potted component to let out the bubbles. It can be heat cured, about 30mins in 80°C. It needs about 4-5hours cured under room temperature. Require 24 hours to achieve surface without obvious oil layer.
Vacuum defoaming can improve the performance of cured product. Seal the remaining products tightly after use. Low temperature will slow the curing speed; heat curing is recommended. It's hard for SI8715 to cure if contact with sulfur, amine or Sn 
∎Attention of operation
●Keep away from Children
●Avoid contact with eyes and skin. If contact with your skin, scrub first with soap water or alcohol, then rinse with water. If contact with your eyes, rinse with plenty of water, and seek medical treatment immediately.
● It is forbidden to build on the surface of the wet substrate.
∎Safety Operation Data
MSDS isn't included here. Please read TDS, MSDS and label carefully before operation. You can get MSDS from MAXTECH or other distributors, or mail to service center maxtech@shmaxtech.com
∎Warranty and Liability
All product properties and application details based on information believe to be reliable and accurate. But you still need to test its property and safety before application. The advice we supply don't apply in any circumstances. MAXTECH don't make assurance of any other applications outside the specification until MAXTECH supply a special written guarantee. MAXTECH is only responsible to replace or refund if this product is defective within the warranty period stated above. MAXTECH makes it clear that will not be liable of any accidents.
Shanghai Max tech Co., Ltd is a leading supplier of PU Adhesive Sealant, Silicone Sealant, MS polymer sealant, Waterproofing coating & Waterproofing tape, and lubricating grease. The products are mainly used in industrial areas such as automotive, machinery, Ship, and construction. For Example, the windshield, bus glass, metal sheet, tunnels, airports running way and high speedway house decoration, roof, wall, electronic component and furniture, and so on.
With more than 10 years of effort & premium quality, And we have won the approval of domestic and international customers. Especially in Southeast Asia, South America, North America, and Africa.
Our Mission: Make every customer satisfied with our products and services.
Choose MAX TECH, a trusted long-term partner. For example:
1. OEM Manufacturing welcome: Product, Package...
2. Sample order
3. We will reply you for your inquiry in 24 hours.
4. after sending, we will track the products for you once every two days, until you get the products. When you got the
goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer the solve way for you.
We will proceed from reality and provide corresponding products according to the real needs of customers, and We also can provide OEM/ODM services. We have different grade to meet all the request,
Silicone Gels
Silicone Adhesive Sealant
Epoxy Potting Materials
Two-component Silicone Gel
| 8708 | Silicon Hydrogen addition type | 1:1,Self-healing silicone gel, similar to DC 527,wacker 612,momentive 3062, has different cone penetration versions or viscosity and toughness |
| 8707 | Silicon Hydrogen addition type | 1:1,SHORE00 50, tensile strength is 0.5MPa, slightly sticky, optical grade. Has adhere with PCB. similar with Dowsil 3-4200. |
| 8606 | Silicon Hydrogen addition type | 1:1,penetration 1/10mm 60,Excellent heat stable property at high temperature to 230℃ for longteam 1000hrs, with also stable
hardness. similar with Dowsil 3896 4020, WACKER 915 |
| 8716 | Silicon Hydrogen addition type | good sticky to skin, could be used to make Scar patch and trauma patch, with medical certification of ISO 10993, similar with Dow corning 7-9700 soft skin adhesive |
| 8250 | Silicon Hydrogen addition type | 1:1,SHORE A 50, For optical device modules, and can be used in the injection molding optical lens and optical waveguide coupling
to reduce the scattering loss, resist the environmental pollution, similar with Dowsil SYLGARD 184 and EI-1184 |
| 8200 | Silicon Hydrogen addition type | 1:1, shore 00 35, very soft but no sticky, good strength, has adhere to PET/Glass/aluminum with primerless, optically clear, similar with henkel 5600, DC EA-3500, 3-3636 |
Q: What is delivery time?
A:Normally the delivery time is about 15 days depend on quantity required after deposit. Except public holidays.
Q: What is the minimum order quantity?
A: Normally our MOQ is 1000kg, For the first time, Small order is welcomed, we will support it.
Q: How to get the samples?
A: Yes , 100-200g free samples are available. Delivery cost will be paid by clients.
Q: How long can I get a quote?
A: The quotation could be provided within 24 hours once we know all detailed requirements.
Q: Can you provide OEM service?
A: Yes, OEM & ODM are welcome. Private Label We can accept.
Q: How can you guarantee the quality?
A: We have rigorous quality test system, from raw materials to finished products, the materials must be inspected and signed by QC staff.
We have various types sealant adhesive.
Any questions, you are welcomed to contact us at any time.
We also can supply the
resourcing of related products.
Any inquiry, welcome to talk more with us , contact us sally, sally@shmaxtech.com; +8618321208486
