75 Kva Power Pole Transformer Single Phase Pole Mounted Overhead
Distribution 34.5kv To 120v Ansi Ieee Doe 2016 Standards
The pole-mounted transformer is a fully sealed cylindrical
structure and is installed by pole-mounted suspension. It has the
advantages of small size, strong overload capacity, high
reliability in continuous operation, simple maintenance, long
service life, small infrastructure investment, and reduced
low-voltage power supply radius. It can reduce low-voltage line
losses by more than 60%. The products are widely used in industrial
and agricultural power grid transmission and distribution.
Why choose us
- The pole-mounted transformers produced by WINLEY have a rated
capacity ranging from 10 kVA to 333 kVA and meet ANSI, IEEE, CSA,
IEC60076 and other standards.
- Through optimized electrical design, our products are safe, stable,
and efficient, helping you save operating costs
- Our products have been exported to North America, Central and South
America, Southeast Asia and other markets in large quantities. We
have rich experience and can provide comprehensive technical
support and services.
Main Data
| Transformer Type | Overhead Distribution Transformer, Conventional Type |
| Transformer Configuration | Liquid Filled Pole Mounted |
| Transformer Polarity Type | Subtractive |
| Phase | Single Phase |
| Capacity | 75 KVA |
| Primary Voltage | 34500Y/19920 |
| Secondary Voltage | 120/240V (L-N-L) |
| Vector Group | II0 |
| Frequency | 60 Hz |
| Temperature Rise | 65°C |
| Insulation Rating | Class E |
| Cooling Class | ONAN |
| Efficiency Standard(s) | Meets DOE 2016 Standards, Meets ANSI/IEEE Standards |
| K-Factor Rating (Harmonic Mitigation) | K-1 (Standard) |
| Winding Material | Copper |
| Ambient Temperature Rating | 40°C |
| Efficiency | 99.00% |
| No Load Loss (in watts) | +/- 237W |
| Full Load Loss (in watts) | +/- 835W |
Drawing
The transformer is cylinder sealing structure. Each one is fixed
with grounding devices, hooks, sup porting lugs which conforms to
ANSI standard, and one or two high voltage bushing on the cover,
low voltage bushing on the wall of the tank and eyebolt,connecting
terminals. The tap changer should be adjusted basing on the
instruction after the power off.
Core features
* Available option of FR3 fluid for increased fire safety or
electrical grade mineral oil
* Meets or exceeds industry standards including ANSI, NEMA and DOE
Energy Efficiency
* Constructed with EPRI-recommended interlaced core-type design for
greater resistance to low-side voltage surges
* Polymer low-voltage bushings are standard at 5-50 kVA
* Cores and coils designed for high reliability and low field
failure rates: Available in grain-oriented electrical or amorphous
steel
* Domed cover design and formed cover band provide increased
pressure withstand capability, eliminate bushing overhang and
improve cover retention
* High-voltage bushing design improves gasket protection and seal
*Configurable to Rural Utilities Service (RUS) specification
Specifications
| 10kva-333kva Single-phase oil immersed transformer |
| Rated Cap acity(kVA) | High | Low Voltage(v) | Connection Symbol | Standard | Short-circuit impedance(%) | Efficiency |
| Voltage(v) | (%) |
| 10 | 4160
7200
12000
12470
13200
13800
19920
24940
34500 | 110
220
230
400
480 | II0,II6 | IEEE/ANSI/ DOE | 1.8-4% | 98.7 |
| 15 | 98.82 |
| 25 | 98.95 |
| 37.5 | 99.05 |
| 50 | 99.11 |
| 75 | 99.19 |
| 100 | 99.25 |
| 167 | 99.33 |
| 250 | 99.39 |
| 333 | 99.43 |
Production process
FAQ
1. Q: Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
2. Q: What is the lead time?
A: Mass production time 15-25 days.
3. Q: How long is the warranty?
A: 24 monthes from B/L. If there are any accessory problems,just
provide the photos of damaged accessory,then we will provide free
service. According to the number of products,we will provide easily
damaged accessories for free. we also can provide technical support
if you need.
4. Q: Is OEM/ODM available?
A: Yes,it is! We are manufacturer with our own R&D team, we can
customize products according to customer's drawing or requirements.
Customized services:
a. Customized color and special function.
b. Customized box.
c. Print customer's logo.
d. Your other ideas about product, we can help you design and put
them into production. The above customized services must be
confirmed before production.
5. Q: How to control the products quality?
A: Our company owns the core technology ,all kinds of products hold
CE certificate. We have professional engineers. Workers are
strictly required to make products according to the drawings. Each
process has technical instructors.The QC supervisors will regularly
inspect the production. We will do products performance tests
during production, and comprehensive quality tests when the
products is completed.
