STT50A Multi-function Pipe and Bolt threading machine up to 2" and
M33
The threading machine is composed of a body, a motor, a chuck, a
die head, a chamfering device, a cutter frame, a knife feed device,
and a cooling system. There are generally two types of threading
machines in the market. One is a heavy-duty threading machine, all
made of aluminum alloy, with large weight, stable performance, and
high price. It is suitable for long-term projects and is not easy
to move. The other is a light threading machine, the lower part is
made of iron plate, the upper part is made of aluminum alloy, which
is small in weight, strong in flexibility, low in price, and low in
stability. It is suitable for projects with short construction
period and frequent flow.
Specifications
Model: STT50A
Machining size: 1/2"-2" (Φ13-Φ50) for pipe
Motor power: 900W
Speed: 28rpm
G.W./N.W.: 78/70kgs
Packing size: 700*440*540mm
Standard Equipment
Quick-open die head
Dies set 1/2”-3/4”
Dies set 1”-2”
Support
Tools bag
Optional die head
Quick-open die head
Dies set: M10, M12, M14-16, M18-M22, M24-
27, M30, M33
Dies set: M8, M10, M12, M14, M16, M18,
M20, M22, M24
Dies set: BSW ¼”, 3/8”, ½”, 5/8”, ¾”, 7/8”, 1”
Key words:pipe threading machine, electric pipe threading machine, Iron pipe
threading machine, steel pipe threader, stainless steel threading
machine, portable pipe threading machine, automatic pipe threading
machine
Technical data
| Product Name | STT50A Multi-function Pipe and Bolt threading machine up to 2" and
M33 |
| Rotational speed of main shaft | 28 r/min/ |
| Model of die head | Die head for (1/2″-2″) |
| Scope of application | 1/2-2" |
| Power of motor: | 900w |
| Gross net weight | 78kg/70kg |
| Packing dimension | 700mm*440mm*540mm |
| Item | steel pipe threader |
| Key word | stainless steel pipe threading machine |
Detail photos
A pipe threading machine is a tool used to create threads on the
end of a pipe. There are two types of threading machines: electric
and manual. Both types use a die head to cut the threads, but the
way they power the die head is different.
Electric threading machines use an electric motor to rotate the die
head. The motor is connected to a gearbox that reduces the speed
and increases the torque. The gearbox then drives the spindle,
which rotates the die head. The die head is mounted on a carriage
that moves along the length of the pipe. The carriage is controlled
by a hand-held pendant that the operator uses to move the carriage
and start the threading process. Once the die head has cut the
threads, the operator reverses the carriage to remove the die head
from the pipe.
Important Notice
1. This machine shall be used with reliable grounding and
anti-creep device.
2. Children are prohibited from touching this machine to avoid
injury.
3. This machine shall not use the same socket with large-power
machines, such as electric welding machine.
4. Pipe clamps shall not be installed on the machine, to avoid
cracking of main components such as the cabinet.
5. Saponified solution shall not be used for cooling, such as
water.
6. When above 2½″ pipe thread is made, it is required to adopt the
low-gear processing mode,
7. When leaving factory, centrality of the machine has been
measured, but pipes on the market have certain ovality at present.
After machining, screw threads may be deep on one side and shallow
on the other side. If they affect use, please check the quality of
pipes.
