Performance and features:
1. This series of crushers uses a two-stage continuous crushing
process with dual rotors, without a screening device, and has no
requirements for moisture content. The output is also not affected
by moisture, and there is no bonding or blockage phenomenon.
Controlling the size of the material only requires adjusting the
gap between the crusher hammer heads,
2. Alloy wear-resistant hammer head, combined with hammer handle,
only requires replacement of hammer head.
3. Unique displacement gap adjustment technology, the hammer head
does not need to be repaired or replaced immediately when worn, and
can be used immediately by adjusting its position.
4. The crusher can rotate in both directions, and through regular
forward and reverse operation, it can evenly wear between the
hammer head and the crushing plate, reducing the frequency of
stopping and replacing vulnerable parts.
5. The discharge particle size is uniform, the crushing ratio is
high, the output is high, and the energy consumption is low.
6. Suitable for fine crushing of brittle materials, non clogging,
low dust, and low noise.
7. Easy installation and quick maintenance.
8. By configuring hydraulic auxiliary mechanisms, one person can
complete tasks such as operation, maintenance, and component
replacement.
Technical parameters:
| Model | 2PCX 400X600 | 2PCX 600X600 | 2PCX 600X800 | 2PCX 800X1000 | 2PCX 1000X1000 |
| Inlet granularity | ≤100mm | ≤120mm | ≤150mm | ≤200mm | ≤200mm |
| Outlet granularity | ≤3mm(95%) | ≤3mm(95%) | ≤3mm (90%) | ≤3mm(90%) | ≤3mm (90%) |
| Capacity t/h | 15--25 | 25--40 | 45--65 | 80--100 | 100--120 |
| Moisture | ≤30% | ≤30% | ≤30% | ≤30% | ≤30% |
| Power Kw | 22+22 | 45+45 | 75+75 | 90+90 | 110+110 |
Can be customized according to requirements.
