Name: 22KW Aerospace Ultrasonic Cleaner 50KHZ Ultrasonic Washer For Titanium Alloys And Composite Materials
Brand: Jietai
Price: 300000 USD

22KW Aerospace Ultrasonic Cleaner 50KHZ Ultrasonic Washer For Titanium Alloys And Composite Materials

Ask Lasest Price

Brand Name :

Jietai

Model Number :

JTM-200TGS

Certification :

CE, FCC, ROHS, etc.

Price :

￥300000

Payment Terms :

T/T

Supply Ability :

One unit. It will take 30 to 60 days.

Delivery Time :

30-60work days

22KW Aerospace Ultrasonic Cleaner 50KHZ Ultrasonic Washer For Titanium Alloys And Composite Materials

Specialized Ultrasonic Cleaning System For Aerospace Structural Components | Non-Destructive Cleaning Solutions For Titanium Alloys And Composite Materials

24-hour Non-stop Operation, Processing 3,000 Pieces per Hour

Chain Conveyor System: Creating an Uninterrupted Cleaning Production Line

Dual-speed Double-chain Transmission: The main track adopts a dual-mode of high-speed conveying at 1.2m/s (unloaded) + low-speed cleaning at 0.5m/s (loaded), compatible with workpieces weighing between 5-50kg (such as automotive engine blocks and new energy battery trays). The actual production capacity reaches 3,000 pieces per hour (taking automotive aluminum wheels as an example), which is 4 times more efficient than traditional single-machine cleaning.
Intelligent Anti-collision Carriers: Each carrier is equipped with an elastic buffer mechanism (compression stroke ±10mm), supporting 30° inclined conveying without displacement (offset < 0.2mm). It is suitable for complex structural parts with bosses, such as flanges and gearboxes, to avoid collision damage during transportation.

Five-stage Spraying Process: Cleaning Every Surface without Blind Spots

Multi-level Pressure Gradient Design:
- Pre-washing Stage (8bar): High-pressure fan-shaped nozzles (aperture 1.5mm) wash away large debris on the surface of workpieces (such as foundry sand and cutting iron filings), with a removal rate of ≥95%.
- Fine-washing Stage (15bar): Rotating spray arms (rotational speed 200rpm) work with 5μm precision-filtered cleaning agents to remove 0.1mm-level oil stains (such as stamping drawing oil and heat treatment residues). The cleanliness rate of the inner walls of blind holes reaches 98.5%.
- Hot Air Drying Stage: 80℃ constant-temperature air (wind speed 15m/s) is combined with an infrared moisture sensor to monitor the moisture content of grooves in real-time (target ≤0.1%). The drying time is shortened to 2 minutes per piece.
Recycling of Cleaning Liquids: The three-stage filtration system (20μm primary filtration + 5μm fine filtration + activated carbon adsorption) extends the replacement cycle of cleaning agents to 48 hours, saving 35% of monthly consumable costs (calculated based on a 10-ton tank).

Modular Quick Changeover: Compatible with Multiple Types of Workpieces

Quick-release Spray Racks: Designed with a combination of magnetic attraction and snap fasteners, it can switch the spraying angles of car/truck parts within 5 minutes (such as adjusting the nozzle spacing to fit engine blocks of different sizes), supporting mixed-line production.
Parameter Memory Function: 20 sets of process programs are preset (storing 32 parameters such as cleaning time, pressure, and temperature), shortening the new product introduction time by 60%. It is suitable for cleaning various parts, including motor housings of new energy vehicles and gearboxes of traditional fuel vehicles.

*From:

Your email address is incorrect!

To:: guangdong Jietai Ultrasonic cleaning Equipment Co., Ltd.

*Subject:

Your subject must be between 10-255 characters!

*Message:

For the best results, we recommend including the following details:

--Self introduction
--Required specifications
--Inquire about price/MOQ

Your message must be between 20-3,000

Yes! I would like your verified suppliers matching service!

*From:

*To:

guangdong Jietai Ultrasonic cleaning Equipment Co., Ltd.

*Subject:

*Message:

Characters Remaining: (0/3000)

All Categories