720rpm Band Precision Panel Saw Machine Vertical Sawmill 3500mm

This type of band saw is the most common machine for cutting materials before furniture manufacturing and wood line processing.

①Installation of the machine tool: The workbench should be kept level during installation, the surrounding pads should be solid
and there is no gap between the ground, and the anchor screws should be installed. Wire according to the requirements of the
motor. This machine uses a three-phase 380V AC power supply, which must be safely grounded.
②The adjustment of the machine tool: mainly adjust the position of the band saw blade, the saw teeth should just protrude from the
edge of the wheel; if the saw blade will run out or run in, you can loosen the movable gear sleeve on the handwheel shaft to
adjust the rear carriage High or low, the aluminum sheet will also follow the positive position, and then press into the gear
sleeve. At this time, the two carriages of the handwheel will be raised or lowered at the same time. The adjustment is completed
by raising the saw blade and adding the balance iron.
③Trial run: After adjusting the band saw blade, try to start, see if the direction of rotation is consistent with the
requirements, see if there is any looseness or abnormal noise, and then start the operation after everything is normal.

PRE-SALE SERVICES:
1. Introduce and Provide detailed consultation of the machine
2. Strict quality control system, warranty period.:2years
3. Provide custom-made service offering good suggest and design idea to customer
4. Welcome to visit our factory
SERVICES DURING SALES:
1. Fast delivery and 100% QC Inspection before shipment
2. Install and debug the machine well in our factory
3. Provide safety package and shipping to clients
AFTER-SALE SERVICES:
1. Carefully train first-line operators operation knowledge
2. Engineers available to service machinery overseas timely.
3. Our sales team and senior engineer are ready for service for you in every 7*24hours.

Q1: How to install?