80-80KN/M GlassFiber Asphalt Biaxial Reinforce Fiberglass Geogrid
Parking Lots Strength Road Bearing
Product characteristics and strength performance
Tensile strength: The biaxial design of 80-80KN/M means that both
the longitude and latitude have high tensile strength, which can
evenly disperse the concentrated load of the parking lot and reduce
local deformation
Asphalt coating: The surface is coated with an asphalt
reinforcement layer to improve the adhesion with the asphalt
mixture, prevent interlayer slippage, and extend the service life
Corrosion resistance: The glass fiber material is acid and alkali
resistant and aging resistant, suitable for the humid environment
and chemical exposure of the parking lot
Parking lot application advantages
Rutting and crack resistance: By enhancing the bearing capacity of
the base layer, the rutting and reflective cracks of the asphalt
layer caused by repeated rolling of heavy-loaded vehicles are
reduced.
Thin layer construction: The thickness of the asphalt covering
layer of the parking lot can be reduced to 50mm, saving material
costs
Quick construction: The self-adhesive design simplifies the laying
process and supports fast construction of large-area parking lots
Technical parameters and standards
Grid size: Commonly 25.4×25.4mm or customized specifications to
meet the needs of different parking lot bases
Asphalt Fiberglass Geogrid Function:
high temperature resistance (mostly used in the construction of
asphalt pavement), function
1. Effective reinforcement and anti-cracking, effectively
prolonging the life of the road
(asphalt pavement, cement concrete pavement subgrade reinforcement)
2. It has high tensile strength and low elongation in both
directions of warp and weft, and has excellent properties
such as high temperature resistance, low cold resistance, aging
resistance, and corrosion resistance.
3. Slow down cracking
Asphalt Fiberglass Geogrid :
Fiberglass geogrid technological standard(GB/T 21825-2008) |
specification | FG30×30 | FG50×50 | FG
60×60 | FG
80×80 | FG
100×100 | FG
120×120 | FG
150×150 |
Mesh center distance(mm) | MD | 25.4±3.8 , 12.7±3.8 |
CMD | 25.4±3.8 , 12.7±3.8 |
breaking strength(kn/m) | MD | 30 | 50 | 60 | 80 | 100 | 120 | 150 |
CMD | 30 | 50 | 60 | 80 | 100 | 120 | 150 |
Breaking Elongation(%) | MD | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
CMD | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
Width(m) | 1m-6m | 1m-6m | 1m-6m | 1m-6m | 1m-6m | 1m-6m | 1m-6m |
100-100K Fiberglass Geogrid Before Coated 50-50 Glassfiber After
Coated Bitumen
Mesh Size 25.4x25.4mm Mesh Size 12.8x 12.8 mm
Applications of Fiberglass Geogrid
1. Road & Highway Reinforcement
2. Retaining Walls & Slopes
3. Airport Runways & Parking Lots
4. Landfill & Erosion Control
Asphalt Fiberglass Geogrid Professional Installation Guide :
Surface Preparation:
Mill existing pavement as needed
Apply polymer-modified tack coat (0.6-0.8 kg/m²)
Geogrid Placement:
Unroll with machine direction perpendicular to traffic flow
Minimum 300mm side overlaps, 500mm end overlaps
Asphalt Placement:
Minimum 75mm overlay thickness recommended
Maintain ≥150°C mix temperature during placement
