Network Module for Cisco 3850 Series Switches 8 x 10GE
C3850-NM-8-10G
The Cisco Catalyst 3850 Series is the next generation of
enterprise-class stackable Ethernet and
Multigigabit Ethernet access and aggregation layer switches that
provide full convergence between
wired and wireless on a single platform. Cisco's Unified Access
Data Plane (UADP) application-specific
integrated circuit (ASIC) powers the switch and enables uniform
wired-wireless policy enforcement,
application visibility, flexibility and application optimization.
This convergence is built on the resilience
of the improved Cisco StackWise-480 technology. The Cisco Catalyst
3850 Series Switches support full
IEEE 802.3at Power over Ethernet Plus (PoE+), Cisco Universal Power
over Ethernet (Cisco UPOE), modular
and field-replaceable network modules, RJ45 and fiber-based
downlink interfaces, and redundant fans
and power supplies. With speeds that reach 10Gbps, the Cisco
Catalyst 3850 Multigigabit Ethernet Switches
support current and next-generation wireless speeds and standards
(including 802.11ac Wave 2) on
existing cabling infrastructure.
C3850-NM-8-10G Specification |
| Additional Attributes |
| Parent Product Data | Key:64 |
| Header |
| Compatibility | PC |
| Manufacturer | Systems |
| Packaged Quantity | 1 |
| Product Line | |
| Brand | |
| Interface Provided |
| Qty | 8 |
| Connector Type | SFP/SFP+ |
| Networking |
| Type | Expansion module |
| Form Factor | Plug-in module |
| Connectivity Technology | Wired |
| Data Transfer Rate | 10 Gbps |
| Data Link Protocol | 10 Gigabit Ethernet, Gigabit Ethernet |
| Status Indicators | Port status |
| Ports |
| Qty | 8 |
| Type | 10 Gigabit SFP+ / SFP (mini-GBIC) |
The Cisco Catalyst 3850 Series Switches support five optional
network modules for uplink ports. The default
switch configuration does not include the network module.
The following photo shows the following network modules:
●4 x Gigabit Ethernet with Small Form-Factor Pluggable (SFP)
receptacles
●2 x 10 Gigabit Ethernet with SFP+ or 4 x Gigabit Ethernet with SFP
receptacles
●4 x 10 Gigabit Ethernet with SFP+ receptacles (supported only on
the 48-port Gigabit Ethernet models
or on the 12-port or higher 10 Gigabit Ethernet models)
Figure 5.
Network modules with four Gigabit Ethernet, two 10 Gigabit Ethernet
SFP+, or four 10 Gigabit Ethernet SFP+ interfaces
The following photo shows the following network modules:
●8 x 10 Gigabit Ethernet with Small Form-Factor Pluggable+ (SFP+)
receptacles
●2 x 40 Gigabit Ethernet with Quad Small Form-Factor Pluggable+
(QSFP+) receptacles
Network modules with two 40 Gigabit Ethernet QSFP+ or eight 10
Gigabit Ethernet SFP+ interfaces
