Cisco C3850 series 24 Ports UPoE Managed Network Switch
WS-C3850-24U-S
Cisco WS-C3850-24U-S supports Stackable 24 10/100/1000 Cisco UPOE
ports, 1 network module slot, 1100 W
power supply and 1RU chassis. Cisco Catalyst 3850 Series provides
capabilities that ideally suited to support the
convergence of wired and wireless access. The new Cisco Unified
Access Data™ Plane (UADP) Application-Specific
Integrated Circuit (ASIC) powers the switch and enables uniform
wired-wireless policy enforcement, application
visibility, flexibility, and application optimization. This
convergence is built on the resilience of the new and improved
Cisco StackWise-480 technology.
Technical Specifications |
Capacity |
Type | Switched virtual interfaces (SVIs) |
Value | 1000 |
Dimensions & Weight |
Width | 17.5 in |
Depth | 17.7 in |
Height | 1.8 in |
Weight | 16.31 lbs |
Flash Memory |
Installed Size | 2 GB |
Interface Provided |
Qty | 24 |
Type | Serial (RS-232) |
Connector Type | Type B |
Comments | UPOE |
PoE Power | 30 W |
Miscellaneous |
Compliant Standards | BSMI CNS 13438 Class A, CISPR 22 Class A, CISPR 24, CSA C22.2 No.
60950-1 Second Edition, EN 60950-1 Second Edition, EN 61000-3-2,
EN 61000-3-3, EN55022 Class A, EN55024, FCC Part 15 A, GOST,
ICES-003 Class A, IEC 60950-1 Second Edition, ISO 7779, KCC, NOM,
RoHS, UL 60950-1 Second Edition, VCCI Class A |
Authentication Method | Kerberos, RADIUS, Secure Shell (SSH), TACACS+ |
MTBF | 269,450 hours |
Height (Rack Units) | 1 |
Networking |
Type | Switch |
Connectivity Technology | Wired/Wireless |
Remote Management Protocol | CLI, RMON 1, RMON 2, SNMP 1, SNMP 2c, SNMP 3, SSH, Telnet |
Compliant Standards | IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w,
IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad (LACP), IEEE
802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
Status Indicators | PoE, Port duplex mode, Port transmission speed, Status, System |
Ports Qty | 24 |
Routing Protocol | EIGRP, RIP-1, RIP-2, RIPng |
MAC Address Table Size | 32000 entries |
Stackable | Stackable |
Subcategory | Network hubs and switches |
Power Over Ethernet (PoE) | UPOE |
Advanced Switching | Layer 3 |
Manageable | Yes |
Form Factor | Desktop, Rack-mountable |
Jumbo Frame Support | 9198 bytes |
Subtype | Gigabit Ethernet |
PoE Budget | 435 W |
Performance |
Type | Switching capacity |
Value | 88 Gbps |
Ports |
Qty | 24 |
Type | 10/100/1000 (UPOE) |
Network modules
The Cisco Catalyst 3850 Series Switches support five optional
network modules for uplink ports. The default switch configuration
does not include the network module.
Figure 5 shows the following network modules:
●4 x Gigabit Ethernet with Small Form-Factor Pluggable (SFP)
receptacles
●2 x 10 Gigabit Ethernet with SFP+ or 4 x Gigabit Ethernet with SFP
receptacles
●4 x 10 Gigabit Ethernet with SFP+ receptacles (supported only on
the 48-port Gigabit Ethernet models or on the 12-port or
higher 10 Gigabit Ethernet models)
Network modules with four Gigabit Ethernet, two 10 Gigabit Ethernet
SFP+, or four 10 Gigabit Ethernet SFP+ interfaces
Figure 2 shows the following network modules:
●8 x 10 Gigabit Ethernet with Small Form-Factor Pluggable+ (SFP+)
receptacles
●2 x 40 Gigabit Ethernet with Quad Small Form-Factor Pluggable+
(QSFP+) receptacles
Figure 2
Network modules with two 40 Gigabit Ethernet QSFP+ or eight 10
Gigabit Ethernet SFP+ interfaces
