Product Description
C9300-48P-E 9300 Managed L3 Switch - 48 Poe+ Ethernet Ports
(c9300-48p-e) switch
Cisco Catalyst 9300 Series switches are Cisco’s lead stackable
enterprise access switching platform and
as part of the Catalyst 9000 family, are built to transform your
network to handle a hybrid world where the
workplace is anywhere, endpoints could be anything, and
applications are hosted all over the place.
C9300-48P-E Specification |
| Part Number | C9300-48P-E |
| Product Description | Catalyst 9300 48-port PoE+, Network Essentials |
| Total 10/100/1000 or Multigigabit copper ports | 48 POE+ |
| Default AC power supply | 715W AC |
| Available PoE power | 437W |
| Cisco StackWise-480 | Yes |
| Cisco StackPower | Yes |
| Default power supply | PWR-C1-715WAC-P/2 |
| Switching capacity | 256 Gbps on 48-port Gigabit Ethernet model |
| Stacking bandwidth | 480 Gbps |
| Total number of MAC addresses | 32,000 |
| Total number of IPv4 routes (ARP plus learned routes) | 32,000 (24,000 direct routes and 8000 indirect routes) |
| IPv4 routing entries | 32,000 |
| IPv6 routing entries | 16,000 |
| Multicast routing scale | 8000 |
| QoS scale entries | 5120 |
| ACL scale entries | 5120 |
| Packet buffer per SKU | 16 MB buffer for 24- or 48-port Gigabit Ethernet models |
| FNF entries | 64,000 flow on 24- and 48-port Gigabit Ethernet models |
| DRAM | 8 GB |
| Flash | 16 GB |
| VLAN IDs | 4000 |
| Total Switched Virtual Interfaces (SVIs) | 2000 |
| Jumbo frames | 9198 bytes |
| Total routed ports per 9300 Series stack | 208 |
| Wireless bandwidth per switch | Up to 96 Gbps on 48-port Gigabit Ethernet model |
| Forwarding rate | 154.76 Mpps |
| Dimensions (H x W x D) | 1.73 x 17.5 x 17.5 Inches |
| Weight | 16.33 Pounds |
Network Modules
Cisco Catalyst 9300 Series switches (C9300X and C9300 SKUs) support
optional network modules for uplink
ports . These field-replaceable network modules with 25G and 40G
speeds in the Cisco Catalyst 9300 Series enable
greater architectural flexibility and infrastructure investment
protection by allowing a nondisruptive migration from
10G to 25G and beyond. The default switch configuration does not
include the network module. When you purchase
the switch, you can choose from the network modules described in
Table 2.
Cisco Catalyst 9300 Series Network Modules
