WS-C2960XR-24TS-I Overview
Cisco® Catalyst® 2960-X and 2960-XR Series Switches are fixed-configuration,
stackable Gigabit Ethernet switches that provide enterprise-class
access for campus and branch applications (Figure 1). They operate
on Cisco IOS® Software and support simple device management as well as network
management. The Cisco Catalyst 2960-X and 2960-XR Series provide
easy device onboarding, configuration, monitoring, and
troubleshooting. These fully managed switches can provide advanced
Layer 2 and Layer 3 features as well as optional Power over
Ethernet Plus (PoE+) power. Designed for operational simplicity to
lower total cost of ownership, they enable scalable, secure, and
energy-efficient business operations with intelligent services. The
switches deliver enhanced application visibility, network
reliability, and network resiliency.
Cisco Catalyst 2960-X and 2960-XR Series Switches feature:
● 24 or 48 Gigabit Ethernet ports with line-rate forwarding
performance
● 4 fixed 1 Gigabit Ethernet Small Form-Factor Pluggable (SFP)
uplinks or 2 fixed 10 Gigabit Ethernet SFP+ uplinks
● PoE+ support with a power budget of up to 740W and Perpetual PoE
● Cisco IOS LAN Base or LAN Lite1 and Cisco IOS IP Lite
● Device management with web UI, over-the-air access via Bluetooth,
Command-Line Interface (CLI), Simple Network Management Protocol
(SNMP), and RJ-45 or USB console access
● Network management with Cisco Prime®, Cisco Network Plug and Play, and Cisco DNA Center
● Stacking with FlexStack-Plus and FlexStack-Extended
● Layer 3 features with routed access (Open Shortest Path First
[OSPF]), static routing, and Routing Information Protocol (RIP)
● Visibility with Domain Name System as an Authoritative Source
(DNS-AS) and Full (Flexible) NetFlow
● Security with 802.1X, Serial Port Analyzer (SPAN) and Bridge
Protocol Data Unit (BPDU) Guard
● Reliability with higher Mean Time Between Failures (MTBF) and
Enhanced Limited Lifetime Warranty
Note:
| ① | Ethernet management port | ⑥ | 24*10/100/1000 ports |
| ② | Mode button | ⑦ | SFP module ports |
| ③ | Switch LEDs | ⑧ | CONSOLE LED |
| ④ | USB mini-Type B (console) port | ⑨ | MGMT LED |
| ⑤ | USB Type A ports | ⑩ | RJ-45 console port |
·The Switch LEDs include SYST, STAT, SPEED, IRPS, MAST, STACK and
console port LEDs.
·The IRPS LED is only available on Catalyst 2960-XR switches.
WS-C2960XR-24TS-I Specification
WS-C2960XR-24TS-I Specification |
| Enclosure type | Rack-mountable - 1U |
| Ports | 24 x 10/100/1000 + 4 x 1G SFP |
| Network management Interface | 10/100 Mbps Ethernet (RJ-45) |
| Available PoE Power | None |
| Forwarding bandwidth(Gbps) | 108Gbps |
| Maximum stacking number | 8 |
| Stack Bandwidth | 80G |
| Forwarding Performance | 71.4Mpps |
| Switching bandwidth | 216Gbps |
| Maximum active VLANs | 1023 |
| MAC Address Table Size | 16K (default) |
| CPU | APM86392 600MHz dual core |
| RAM | 512 MB |
| Flash Memory | 128 MB |
| Status Indicators | ● Per-port status: Link integrity, disabled, activity, speed, and
full duplex
● System status: System, RPS, Stack link status, link duplex, and
link speed |
| Expansion / Connectivity |
| Console ports | USB (Type-B), Ethernet (RJ-45) |
| Expansion Slot(s) | 1 FlexStack-Plus slot and 1 power redundant slot |
| Stack Modules | C2960X-STACK |
| Stacking cable | ● CAB-STK-E-0.5M FlexStack-Plus stacking cable with a 0.5 m length
● CAB-STK-E-1M FlexStack-Plus stacking cable with a 1.0 m length
● CAB-STK-E-3M FlexStack-Plus stacking cable with a 3.0 m length |
| Power supply | PWR-C2-250WAC |
| Power Device | Power supply - redundant - plug-in module |
| Power Redundancy | optional |
| Voltage range (Auto) | 110V-240V |
| Power Consumption Operational | 0.038kVA |
| Miscellaneous |
| Width | 17.5 Inches (44.5 cm) |
| Depth | 16 Inches (40.8 cm) |
| Height | 1.75 Inches (4.45 cm) |
| Weight | 13.0 Pounds (5.9Kg) |
| Package Weight | 38.56 Pounds (17.49 Kg) |
| Rack Mounting Kit | Optional |
| MTBF in hours | 557,320 |
| Compliant Standards | ● IEEE 802.1D Spanning Tree Protocol
● IEEE 802.1p CoS Prioritization
● IEEE 802.1Q VLAN
● IEEE 802.1s
● IEEE 802.1w
● IEEE 802.1X
● IEEE 802.1ab (LLDP)
● IEEE 802.3ad
● IEEE 802.3af and IEEE 802.3at
● IEEE 802.3ah (100BASE-X single/multimode fiber only)
● IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T
ports
● IEEE 802.3 10BASE-T
● IEEE 802.3u 100BASE-TX
● IEEE 802.3ab 1000BASE-T
● IEEE 802.3z 1000BASE-X
● RMON I and II standards
● SNMP v1, v2c, and v3
● IEEE 802.3az
● IEEE 802.3ae 10Gigabit Ethernet
● IEEE 802.1ax |
| System software / license |
| System software | IOS IP Lite |
| license | ENERGY-MGMT, ENERGY-MGT-100-K9 |
| features | ● IP unicast routing protocols (Static, Routing Information
Protocol Version 1 [RIPv1], RIPv2, RIPng, and EIGRP-Stub)
● Advanced IP unicast routing protocols (OSPF for Routed Access)
● EIGRPv3-Stub and PIMv6-Stub are supported as a part of the IPv6
routing suite.
● Equal-cost routing
● Policy-based routing (PBR)
● Hot Standby Routing Protocol (HSRP) and Virtual Router Redundancy
Protocol (VRRP)
● Protocol Independent Multicast (PIM) |
| Network security | ● MAC-based VLAN assignment enables ● Cisco TrustSec uses
● Comprehensive 802.1X ● IPv6 First-Hop Security
● Device Sensor and Device Classifier ● Cisco Trust Anchor
Technology
● Cisco Threat Defense ● Private VLANs
● Unicast Reverse Path Forwarding (uRPF) ● Multidomain
Authentication
● Access Control Lists (ACLs) ● Switched Port Analyzer (SPAN)
● Secure Shell (SSH) Protocol, Kerberos, and Simple Network
Management Protocol Version 3 (SNMPv3)
● TACACS+ and RADIUS authentication ● MAC Address Notification
● Multilevel security on console access BPDU Guard
● Spanning Tree Root Guard (STRG) ● IGMP filtering |
| Management & Troubleshooting | ● Auto-MDOX ●TDR ● UDLD ● IP SLA Responder ● layer 2 / IP Traceroute ● SPAN ● RSPAN ● Express Setup ● Device Manager ● Cisco Network Assistant ● Smartports + Advisor ● Troubleshooting Advisor ● Drag-and-drop
Cisco IOS Upgrade ● IP Address DHCP ● Autoinstall with saved configuration ●
Configuration Replace ● DHCP Auto Image Upgrade ● DHCP Port Based Allocation ● Error
Disable MIB |
| Technical Support and Services | ● Cisco SMARTnet Service ● Cisco Smart Foundation Service ● Cisco
Smart Care Service ● Cisco SP Base Service ● Cisco Focused Technical Support Services |
Table 2 shows the IPRS LED description.
| IPRS LED Color | RPS Status |
| Off | Second power supply is not present. |
| Green | Both power supplies are present and operating. |
| Amber | The second power supply is present, but the input is not connected. |
| Blinking amber | The second power supply is present, but the signal is faulty. |
Table 3 shows some accessories of WS-C2960XR-24TS-I.
| Models | Description |
| C2960X-STACK | Catalyst 2960-X FlexStack Plus Stacking Module |
| CAB-STK-E-0.5M | Cisco FlexStack Stacking Cables |
| GLC-LH-SM | GE SFP, LC connector LX/LH transceiver |
| GLC-SX-MM D | 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM |
| CAB-CONSOLE-RJ45 | Console Cable 6ft with RJ45 and DB9F |
| CAB-CONSOLE-USB | Console Cable 6 ft with USB Type A and mini-B |
Table 4 shows the comparison of similar items.
| Models | WS-C2960XR-24TS-I | WS-C2960X-24TS-LL |
| Ports | 24 x 10/100/1000 Ethernet Ports | 24 x 10/100/1000 Ethernet Ports |
| Uplinks | 4 x SFP | 2 x SFP |
| Feature Set | IP Lite | LAN Lite |
| FlexStack-Plus Stacking | Optional | N/A |
