Cisco Catalyst 2960-X and 2960-XR Series Switches Data Sheet
Cisco® Catalyst® 2960-X and 2960-XR Series Switches are fixed-configuration,
stackable Gigabit Ethernet switches that provide enterprise-class
access for campus and branch applications (Figure 1). They operate
on Cisco IOS® Software and support simple device management as well as network
management. The Cisco Catalyst 2960-X and 2960-XR Series provide
easy device onboarding, configuration, monitoring, and
troubleshooting. These fully managed switches can provide advanced
Layer 2 and Layer 3 features as well as optional Power over
Ethernet Plus (PoE+) power. Designed for operational simplicity to
lower total cost of ownership, they enable scalable, secure, and
energy-efficient business operations with intelligent services. The
switches deliver enhanced application visibility, network
reliability, and network resiliency.
Product Highlights
Cisco Catalyst 2960-X and 2960-XR Series Switches feature:
● 24 or 48 Gigabit Ethernet ports with line-rate forwarding
performance
● 4 fixed 1 Gigabit Ethernet Small Form-Factor Pluggable (SFP)
uplinks or 2 fixed 10 Gigabit Ethernet SFP+ uplinks
● PoE+ support with a power budget of up to 740W and Perpetual PoE
● Cisco IOS LAN Bas or LAN Lite1 and Cisco IOS IP Lite
● Device management with web UI, over-the-air access via Bluetooth,
Command-Line Interface (CLI), Simple Network Management Protocol
(SNMP), and RJ-45 or USB console access
● Network management with Cisco Prime®, Cisco Network Plug and Play, and Cisco DNA Center
● Stacking with FlexStack-Plus and FlexStack-Extended
● Layer 3 features with routed access (Open Shortest Path First
[OSPF]), static routing, and Routing Information Protocol (RIP)
● Visibility with Domain Name System as an Authoritative Source
(DNS-AS) and Full (Flexible) NetFlow
● Security with 802.1X, Serial Port Analyzer (SPAN) and Bridge
Protocol Data Unit (BPDU) Guard
WS-C2960X-24TD-L Specification
WS-C2960X-24TD-L Specification |
| Enclosure type | Rack-mountable - 1U |
| Ports | 24 x 10/100/1000 + 2 x 10G SFP+ |
| Network management Interface | 10/100 Mbps Ethernet (RJ-45) |
| Available PoE Power | None |
| Forwarding bandwidth(Gbps) | 108Gbps |
| Maximum stacking number | 8 |
| Stack Bandwidth | 80 G |
| Forwarding Performance | 95.2Mpps |
| Switching bandwidth | 216Gbps |
| Maximum active VLANs | 1023 |
| MAC Address Table Size | 16K (default) |
| CPU | APM86392 600MHz dual core |
| RAM | 256 MB |
| Flash Memory | 64 MB |
| Status Indicators | Per-port status: Link integrity, disabled, activity, speed, and
full duplex System status: System, RPS, Stack link status, link
duplex and link speed |
| Expansion / Connectivity |
| Console ports | USB (Type-B), Ethernet (RJ-45) |
| Stacking cable | Optional |
| Power Redundancy | Option (PWR-RPS2300) |
| Voltage range (Auto) | 110V-240V |
| Power Consumption Operational | 0.034KVA |
| Miscellaneous |
| Width | 17.5 Inches (44.5 cm) |
| Depth | 11.0 Inches (27.9 cm) |
| Height | 1.75 Inches (4.5 cm) |
| Weight | 8.9 lb (4.0 Kg) |
| Package Weight | 20.26 lb (9.19 Kg) |
| Rack Mounting Kit | optional |
| MTBF in hours | 569,520 |
| Compliant Standards | ● IEEE 802.1D Spanning Tree Protocol
● IEEE 802.1p CoS Prioritization
● IEEE 802.1Q VLAN
● IEEE 802.1s
● IEEE 802.1w
● IEEE 802.1X
● IEEE 802.1ab (LLDP)
● IEEE 802.3ad
● IEEE 802.3af and IEEE 802.3at
● IEEE 802.3ah (100BASE-X single/multimode fiber only)
● IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T
ports ● IEEE 802.3 10BASE-T
● IEEE 802.3u 100BASE-TX
● IEEE 802.3ab 1000BASE-T
● IEEE 802.3z 1000BASE-X
● RMON I and II standards
● SNMP v1, v2c, and v3
● IEEE 802.3az
● IEEE 802.1ax |
| System software / license |
| System software | IOS LAN BASE |
| license | NERGY-MGT-100-K9, EW-DO-100-DE |
| features | ●Jumbo Frames ●VLANS ●Voice Vlan ●VTPv2 ●CDPv2 ●LLDP ●802.3ad LACP ●PVST/PVST+ ●802.1W/802.1S ●Port Fast/Uplink Fast ●port CoS Trust and Override ●Scheduling ●Priority Queuing ●Configure CoS Priority Queues ●Weighted Tail Drop ●DSCP transparency |
| Network security | ●SSH, SSL and SCP ●RADIUS and TACACS+ ●SNMPv3 crypto ●802.1x ●802.1x Accounting / MIB ●802.1x w/ port security ●802.1x w/Voice VLAN ●802.1x Guest VLAN ●802.1x VLAN assignment ●802.1x MAC-Auth Bypass ●BPDU/Root Guard ●Port Security ●Private VALN Edge ●Storm Control ●Block unknown unicast and multicast ●IGMP Snooping ●IGMP Filter/Throttle |
| Management and Troubleshooting | ●Auto-MDOX ●TDR ●UDLD ●IP SLA Responder ●layer 2 / IP Traceroute ●SPAN ●RSPAN ●Express Setup ●Device Manager ●Cisco Network Assistant ●Smartports + Advisor ●Troubleshooting Advisor ●Drag-and-drop Cisco IOS Upgrade ●IP Address DHCP ●Autoinstall with saved configuration ●Configuration Replace ●DHCP Auto Image Upgrade ●DHCP Port Based Allocation ●Error Disable MIB |
| Environmental Ranges |
| Operating temperature up to 5000 ft (1500 m) | 23ºF to 113ºF (-5ºC to 45ºC) |
| Operating temperature up to 10,000 ft (3000 m) | 23ºF to 104ºF (-5ºC to 40ºC) |
| Short-term exception at sea level* | 23ºF to 131ºF (-5ºC to 55ºC) |
| Short-term exception up to 5000 feet (1500 m)* | 23ºF to 122ºF (-5ºC to 50ºC) |
| Short-term exception up to 10,000 feet (3000 m)* | 23ºF to 113ºF (-5ºC to 45ºC) |
| Short-term exception up to 13,000 feet (4000 m)* | 23º to 104ºF (-5ºC to 40ºC) |
| Storage temperature up to 15,000 feet (4573 m) | -13º to 158ºF (-25º to 70ºC) |
| Operating altitude | Up to 10,000 Feet (Up to 3000 Meters) |
| Storage altitude | Up to 13,000 (Up to 4000 Meters) |
| Operating relative humidity | 10% to 95% noncondensing |
| Storage relative humidity | 10% to 95% noncondensing |
Table 1.Cisco Catalyst 2960-XR Series default power supply configurations
| Product ID | Default power supply | Available PoE power |
WS-C2960XR-24TS-I WS-C2960XR-48TS-I WS-C2960XR-24TD-I WS-C2960XR-48TD-I | PWR-C2-250WAC | – |
WS-C2960XR-24PD-I WS-C2960XR-48LPD-I WS-C2960XR-24PS-I WS-C2960XR-48LPS-I | PWR-C2-640WAC | 370W |
WS-C2960XR-48FPD-I WS-C2960XR-48FPS-I | PWR-C2-1025WAC | 740W |
Table 2.Cisco Catalyst 2960-X and 2960-XR Series PoE and PoE+ power
capacity
| Model | Maximum number of PoE+ (IEEE 802.3at) ports* | Maximum number of PoE (IEEE 802.3af) ports* | Available PoE power (single PS source) |
| Cisco Catalyst 2960X-48FPD-L | 24 ports up to 30W | 48 ports up to 15.4W | 740W |
| Cisco Catalyst 2960X-48LPD-L | 12 ports up to 30W | 24 ports up to 15.4W | 370W |
| Cisco Catalyst 2960X-24PD-L | 12 ports up to 30W | 24 ports up to 15.4W | 370W |
| Cisco Catalyst 2960X-48FPS-L | 24 ports up to 30W | 48 ports up to 15.4W | 740W |
| Cisco Catalyst 2960X-48LPS-L | 12 ports up to 30W | 24 ports up to 15.4W | 370W |
| Cisco Catalyst 2960X-24PS-L | 12 ports up to 30W | 24 ports up to 15.4W | 370W |
| Cisco Catalyst 2960X-24PSQ-L | 3 ports up to 30W | 7 ports up to 15.4W | 110W |
| Cisco Catalyst 2960XR-48FPD-I | 24 ports up to 30W | 48 ports up to 15.4W | 740W |
| Cisco Catalyst 2960XR-48LPD-I | 12 ports up to 30W | 24 ports up to 15.4W | 370W |
| Cisco Catalyst 2960XR-24PD-I | 12 ports up to 30W | 24 ports up to 15.4W | 370W |
| Cisco Catalyst 2960XR-48FPS-I | 24 ports up to 30W | 48 ports up to 15.4W | 740W |
| Cisco Catalyst 2960XR-48LPS-I | 12 ports up to 30W | 24 ports up to 15.4W | 370W |
| Cisco Catalyst 2960XR-24PS-I | 12 ports up to 30W | 24 ports up to 15.4W | 370W |
* Intelligent power management allows flexible power allocation
across all ports.
