Cisco Catalyst 2960-X and 2960-XR Series Switches Data Sheet
Cisco® Catalyst® 2960-X and 2960-XR Series Switches are fixed-configuration, stackable Gigabit Ethernet switches that provide enterprise-class access for campus and branch applications (Figure 1). They operate on Cisco IOS® Software and support simple device management as well as network management. The Cisco Catalyst 2960-X and 2960-XR Series provide easy device onboarding, configuration, monitoring, and troubleshooting. These fully managed switches can provide advanced Layer 2 and Layer 3 features as well as optional Power over Ethernet Plus (PoE+) power. Designed for operational simplicity to lower total cost of ownership, they enable scalable, secure, and energy-efficient business operations with intelligent services. The switches deliver enhanced application visibility, network reliability, and network resiliency.
Product Highlights
Cisco Catalyst 2960-X and 2960-XR Series Switches feature:
● 24 or 48 Gigabit Ethernet ports with line-rate forwarding performance
● 4 fixed 1 Gigabit Ethernet Small Form-Factor Pluggable (SFP) uplinks or 2 fixed 10 Gigabit Ethernet SFP+ uplinks
● PoE+ support with a power budget of up to 740W and Perpetual PoE
● Cisco IOS LAN Base or LAN Lite1 and Cisco IOS IP Lite
● Device management with web UI, over-the-air access via Bluetooth, Command-Line Interface (CLI), Simple Network Management Protocol (SNMP), and RJ-45 or USB console access
● Network management with Cisco Prime®, Cisco Network Plug and Play, and Cisco DNA Center
● Stacking with FlexStack-Plus and FlexStack-Extended
● Layer 3 features with routed access (Open Shortest Path First [OSPF]), static routing, and Routing Information Protocol (RIP)
● Visibility with Domain Name System as an Authoritative Source (DNS-AS) and Full (Flexible) NetFlow
● Security with 802.1X, Serial Port Analyzer (SPAN) and Bridge Protocol Data Unit (BPDU) Guard
● Reliability with higher Mean Time Between Failures (MTBF) and Enhanced Limited Lifetime Warranty
(E-LLW)
● Resiliency with optional dual field-replaceable power supplies2
Table 1. Cisco Catalyst 2960-XR Series default power supply configurations
| Product ID |
Default power supply |
Available PoE power |
|
WS-C2960XR-24TS-I
WS-C2960XR-48TS-I
WS-C2960XR-24TD-I
WS-C2960XR-48TD-I
|
PWR-C2-250WAC |
– |
|
WS-C2960XR-24PD-I
WS-C2960XR-48LPD-I
WS-C2960XR-24PS-I
WS-C2960XR-48LPS-I
|
PWR-C2-640WAC |
370W |
|
WS-C2960XR-48FPD-I
WS-C2960XR-48FPS-I
|
PWR-C2-1025WAC |
740W |
Table 2. Cisco Catalyst 2960-X and 2960-XR Series PoE and PoE+ power capacity
| Model |
Maximum number of PoE+ (IEEE 802.3at) ports* |
Maximum number of PoE (IEEE 802.3af) ports* |
Available PoE power (single PS source) |
| Cisco Catalyst 2960X-48FPD-L |
24 ports up to 30W |
48 ports up to 15.4W |
740W |
| Cisco Catalyst 2960X-48LPD-L |
12 ports up to 30W |
24 ports up to 15.4W |
370W |
| Cisco Catalyst 2960X-24PD-L |
12 ports up to 30W |
24 ports up to 15.4W |
370W |
| Cisco Catalyst 2960X-48FPS-L |
24 ports up to 30W |
48 ports up to 15.4W |
740W |
| Cisco Catalyst 2960X-48LPS-L |
12 ports up to 30W |
24 ports up to 15.4W |
370W |
| Cisco Catalyst 2960X-24PS-L |
12 ports up to 30W |
24 ports up to 15.4W |
370W |
| Cisco Catalyst 2960X-24PSQ-L |
3 ports up to 30W |
7 ports up to 15.4W |
110W |
| Cisco Catalyst 2960XR-48FPD-I |
24 ports up to 30W |
48 ports up to 15.4W |
740W |
| Cisco Catalyst 2960XR-48LPD-I |
12 ports up to 30W |
24 ports up to 15.4W |
370W |
| Cisco Catalyst 2960XR-24PD-I |
12 ports up to 30W |
24 ports up to 15.4W |
370W |
| Cisco Catalyst 2960XR-48FPS-I |
24 ports up to 30W |
48 ports up to 15.4W |
740W |
| Cisco Catalyst 2960XR-48LPS-I |
12 ports up to 30W |
24 ports up to 15.4W |
370W |
| Cisco Catalyst 2960XR-24PS-I |
12 ports up to 30W |
24 ports up to 15.4W |
370W |
WS-C2960X-24PD-L Specification
WS-C2960X-24PD-L Specification
|
| Enclosure type |
Rack-mountable - 1U |
| Ports |
24 x 10/100/1000 + 2 x 10G SFP+ |
| Network management Interface |
10/100 Mbps Ethernet (RJ-45) |
| Available PoE Power |
370W |
| Forwarding bandwidth(Gbps) |
108Gbps |
| Maximum stacking number |
8 |
| Stack Bandwidth |
80 G |
| Forwarding Performance |
95.2Mpps |
| Switching bandwidth |
216Gbps |
| Maximum active VLANs |
1023 |
| MAC Address Table Size |
16K (default) |
| CPU |
APM86392 600MHz dual core |
| RAM |
256 MB |
| Flash Memory |
64 MB |
| Status Indicators |
Per-port status: Link integrity, disabled, activity, speed, and full duplex System status: System, RPS, Stack link status, link duplex, PoE, and link speed |
| Expansion / Connectivity |
| Console ports |
USB (Type-B), Ethernet (RJ-45) |
| Stacking cable |
Optional |
| Power Redundancy |
Option (PWR-RPS2300) |
| Voltage range (Auto) |
110V-240V |
| Power Consumption Operational |
0.49KVA |
| Miscellaneous |
| Width |
17.5 Inches (44.5 cm) |
| Depth |
14.5 Inches (36.8 cm) |
| Height |
1.75 Inches (4.5 cm) |
| Weight |
12.7 lb (5.7 Kg) |
| Package Weight |
20.26 lb (9.19 Kg) |
| Rack Mounting Kit |
optional |
| MTBF in hours |
325,780 |
| Compliant Standards |
● IEEE 802.1D Spanning Tree Protocol
● IEEE 802.1p CoS Prioritization
● IEEE 802.1Q VLAN
● IEEE 802.1s
● IEEE 802.1w
● IEEE 802.1X
● IEEE 802.1ab (LLDP)
● IEEE 802.3ad
● IEEE 802.3af and IEEE 802.3at
● IEEE 802.3ah (100BASE-X single/multimode fiber only)
● IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports
● IEEE 802.3 10BASE-T
● IEEE 802.3u 100BASE-TX
● IEEE 802.3ab 1000BASE-T
● IEEE 802.3z 1000BASE-X
● RMON I and II standards
● SNMP v1, v2c, and v3
● IEEE 802.3az
● IEEE 802.1ax
|
| System software / license |
| System software |
IOS LAN BASE |
| license |
NERGY-MGT-100-K9, EW-DO-100-DE |
| features |
●Jumbo Frames
●VLANS
●Voice Vlan
●VTPv2
●CDPv2
●LLDP
●802.3ad LACP
●PVST/PVST+
●802.1W/802.1S
●Port Fast/Uplink Fast
●port CoS Trust and Override
●Scheduling
●Priority Queuing
●Configure CoS Priority Queues
●Weighted Tail Drop
●DSCP transparency
|
| Network security |
●SSH, SSL and SCP
●RADIUS and TACACS+
●SNMPv3 crypto
●802.1x
●802.1x Accounting / MIB
●802.1x w/ port security
●802.1x w/Voice VLAN
●802.1x Guest VLAN
●802.1x VLAN assignment
●802.1x MAC-Auth Bypass
●BPDU/Root Guard
●Port Security
●Private VALN Edge
●Storm Control
●Block unknown unicast and multicast
●IGMP Snooping
●IGMP Filter/Throttle
|
| Management and Troubleshooting |
●Auto-MDOX
●TDR
●UDLD
●IP SLA Responder
●layer 2 / IP Traceroute
●SPAN
●RSPAN
●Express Setup
●Device Manager
●Cisco Network Assistant
●Smartports + Advisor
●Troubleshooting Advisor
●Drag-and-drop Cisco IOS Upgrade
●IP Address DHCP
●Autoinstall with saved configuration
●Configuration Replace
●DHCP Auto Image Upgrade
●DHCP Port Based Allocation
●Error Disable MIB
|
| Environmental Ranges |
| Operating temperature up to 5000 ft (1500 m) |
23ºF to 113ºF
(-5ºC to 45ºC)
|
| Operating temperature up to 10,000 ft (3000 m) |
23ºF to 104ºF
(-5ºC to 40ºC)
|
| Short-term exception at sea level* |
23ºF to 131ºF
(-5ºC to 55ºC)
|
| Short-term exception up to 5000 feet (1500 m)* |
23ºF to 122ºF
(-5ºC to 50ºC)
|
| Short-term exception up to 10,000 feet (3000 m)* |
23ºF to 113ºF
(-5ºC to 45ºC)
|
| Short-term exception up to 13,000 feet (4000 m)* |
23º to 104ºF
(-5ºC to 40ºC)
|
| Storage temperature up to 15,000 feet (4573 m) |
-13º to 158ºF
(-25º to 70ºC)
|
| Operating altitude |
Up to 10,000 Feet
(Up to 3000 Meters)
|
| Storage altitude |
Up to 13,000
(Up to 4000 Meters)
|
| Operating relative humidity |
10% to 95% noncondensing |
| Storage relative humidity |
10% to 95% noncondensing |
