Mud Cleaner equipment is combination of desander, desilter hydro
cyclone with an underflow shale shaker. TR Solids Control is Mud
Cleaner manufacture.
Mud Cleaning is a versatile device that is used to separate big
solid components and other slurry materials from drilled mud. In
this article, we’re going to talk about the Mud Cleaner from TR
Solids Control.
Mud fluids Cleaner equipment is a combination of desander, desilter hydro cyclone with an underflow shale shaker. To overcome limitations that are present in many solid removal
equipment, new equipment was developed with the purpose of removing
drilled solids from weighted muds. It does remove most of the
drilled solids while also retaining the barite as well as the
liquid phase present in the mud. The discarded solids are sieved to
discard larger solids, and returned solids are smaller even from
the shaker screen size of the liquid phase.
Mud fluids Cleaning is the second class and the third class solids
control equipment which is the newest type to treat the drilling
fluid. At the same time drilling Mud cleaner has the higher
cleaning function compared with separated desander and desilter. In
addition to the reasonable design process, it equals another drilling shale shaker. Fluids mud cleaning structure is compact, it occupys small space
and the function is powerful.
Mud Cleaner of Technical Parameters
| Model | TRQJ200*1S-100*4N | TRQJ200*2S-100*8N | TRQJ250*2S-100*12N | TRQJ250*3S-100*20N |
| Treatment Capacity | 60m³/h | 120m³/h | 240m³/h | 320m³/h |
| Desander Cyclone Specs | 8in | 10in |
| Desander Cyclone Qty | 1nos | 2nos | 2nos | 3nos |
| Desilter Cyclone Specs | 4in |
| Desilter Cyclone Qty | 5nos | 8nos | 12nos | 20nos |
| Working Pressure | 0.25～0.4mpa |
| Inlet Size | DN125mm | DN150mm | DN150mm | DN200mm |
| Outlet Size | DN150mm | DN200mm | DN200mm | DN250mm |
| Separation Point | 15μm～44μm |
| Bottom Shaker | TRZS60/N/A | TRZS752/N/A | TRZS752/N/A | TRZS703/N/A |
| Dimension | 1510*1160X2000mm | 1835*1230*1810mm | 1835*1230*1810mm | 2419*2150*2147mm |
| Weight | 600kg | 980kg | 1250kg | 2350 kg |
Advantages of Mud Cleaner
1. Environmentally Efficient
It provides efficient removal of sand and silt particles larger
than 20 microns, and some as small as 15 microns. Removing and
drying drilled solids helps meet environmental regulations by
minimizing waste generated and reducing disposal cost.
2. High Performance
Processing capacity of 1,000 gpm with the 2-12 desander and 900 gpm
with the drilling desilter concentrates solids onto a classification shaker
3. Versatile
It can be operated with the 2-12 desander, desilter or both to
process weighted or unweighted fluid systems.
4. Extends Equipment Life
It helps minimize maintenance, repair and replacement of downstream
equipment.
5. Reduces Operating Cost
The fluids cleaner reduces sand and silt-size particles and saves
liquid, thus reducing mud cost, chances of stuck pipe and lost
circulation and improving rate of penetration.
6. Reduces Disposal Cost
It minimizes waste generated thus reducing disposal cost.
Mud Cleaner for Drilling Fluids Solids Control
The Mud fluids Cleaner plays a vital role in the drilling mud system. It is effective when applied directly after barite is added to
the mud system. The continuous use of the drilling cleaner ensures
the removal of solid, which after that breaks down into silt and
clay sizes. It prevents any kind of drill bit solids accumulation
in the equipment.
It is a mud cleaning equipment with a compact structure design and
small footprint but with a powerful function.
We are an exporter of Mud Cleaner. Our factory approval the API,
drilling cleaner have the API certification. TR solids control is
the designed ,selling, production, service and delivery of Chinese
fluids cleaner manufacturer. We will provide the high quality
drilling fluids cleaner and best service. Your best fluids mud
cleaner start from TR solids control.
