Fluke New Fluke 376 FC True-RMS Clamp Meter with iFlex 1000 V AC or
DC
Product overview of Fluke 376 FC True-RMS Clamp Meter with iFlex
The Fluke 376 FC True-rms Clamp Meter with iFlex is the most
advanced troubleshooting tool for industrial and commercial
electricians. The 376 is part of the Fluke Connect family of
wireless test tools that enable you to log, trend and monitor
measurements while remaining safely away from the arc flash zone
through Bluetooth connectivity.
The 376 FC clamp meter uses an integrated low-pass filter for
accurate measurements of non-linear signals, such as adjustable
speed drives, electronic ballasts and other non-linear loads. The
clamp also uses proprietary inrush measurement technology to filter
out noise and capture motor starting current exactly as the circuit
protection sees it.
Features of New Fluke 376 FC True-RMS Clamp Meter
- Voltage to 1000 V AC or DC
- Resistance to 60 kΩ with continuity detection
- Min, max, average, and inrush recording to capture variations
automatically
- 500 mV DC measurement range to interface with other accessories
- 1000 μF capacitance measurement
- Work safely and conveniently
- The 376 FC clamp carries a CAT III 1000 V, CAT IV 600 V safety
rating, designed to offer you the highest possible protection in a
test tool.
Specification of New Fluke 376 FC True-RMS Clamp Meter
| General Specifications |
| AC Current via Jaw |
| Range | 999.9 A |
| Resolution | 0.1 A |
| Accuracy | 2% ±5 digits (10 Hz to 100 Hz) |
| 2.5% ±5 digits (100-500 Hz) |
| Crest Factor (50 Hz/60 Hz) | 3 @ 500 A |
| 2.5 @ 600 A |
| Add 2% for C.F. >2 |
| AC Current via Flexible Current Probe |
| Range | 2500 A |
| Resolution | 0.1 A (≤ 600 A) |
| 1 A (≤ 2500 A) |
| Accuracy | 3% ±5 digits (5 – 500 Hz) |
| Crest Factor (50/60Hz) | 3.0 at 1100 A |
| 2.5 at 1400 A |
| 1.42 at 2500 A |
| Add 2% for C.F. > 2 |
|
| i2500-10 Flex | i2500-18 Flex | i2500-36 Flex |
| A | | | |
| Distance from Optimum | 0.5 in (12.7 mm) | 1.4 in (35.6 mm) | 4.8 in (122.2 mm) |
| Error | ±0.5 % | ±0.5 % | ±0.5 % |
| B | | | |
| Distance from Optimum | 0.8 in (20.3 mm) | 2.0 in (50.8 mm) | 5.3 in (133.6 mm) |
| Error | ±1.0 % | ±1.0 % | ±1.0 % |
| C | | | |
| Distance from Optimum | 1.4 in (35.6 mm) | 2.5 in (63.5 mm) | 5.8 in (147.6 mm) |
| Error | ±2.0 % | ±2.0 % | ±2.0 % |
| Measurement uncertainty assumes centralized primary conductor at
optimum position, no external electrical or magnetic field, and
within operating temperature range. |
| DC Current |
| Range | 999.9 A |
| Resolution | 0.1 A |
| Accuracy | 2% ±5 digits |
| AC Voltage |
| Range | 1000 V |
| Resolution | 0.1 V (≤600.0 V) |
| 1 V (≤1000 V) |
| Accuracy | 1% ±5 digits (20 Hz to 500 Hz) |
| DC Voltage |
| Range | 1000 V |
| Resolution | 0.1 V (≤600.0 V) |
| 1 V (≤1000 V) |
| Accuracy | 1% ±5 digits |
| mV dc |
| Range | 500.0 mV |
| Resolution | 0.1 mV |
| Accuracy | 1% ±5 digits |
| Frequency via Jaw |
| Range | 5.0 Hz to 500.0 Hz |
| Resolution | 0.1 Hz |
| Accuracy | 0.5% ±5 digits |
| Trigger level | 5 Hz to 10 Hz, ≥10 A |
| 10 Hz to 100 Hz, ≥5 A |
| 100 Hz to 500 Hz, ≥10 A |
| Frequency via Flexible Current Probe |
| Range | 5.0 Hz to 500.0 Hz |
| Resolution | 0.1 Hz |
| Accuracy | 0.5% ±5 digits |
| Trigger level | 5 Hz to 20 Hz, ≥25 A |
| 20 Hz to 100 Hz, ≥20 A |
| 100 Hz to 500 Hz, ≥25 A |
| Resistance |
| Range | 60 kΩ |
| Resolution | 0.1 Ω (≤600 Ω) |
| 1 Ω (≤6000 Ω) |
| 10 Ω (≤60 kΩ) |
| Accuracy | 1% ±5 digits |
| Capacitance |
| Range | 1000 μF |
| Resolution | 0.1 μF (≤ 100 μF) |
| 1 μ F (≤ 1000 μF) |
| Accuracy | 1% ±4 digits |
Models of Fluke 376 FC True-RMS Clamp Meter with iFlex
Fluke 376 FC with 18-inch iFlex
Includes:
- Fluke 376 FC True-RMS Clamp Meter
- 18-inch iFlex® Flexible Current Probe
- TPAK magnetic hanging strap
- TL75 Test Leads
- Two AA batteries (Installed)
- Soft carrying case
- Coated instruction card
- Safety information sheet
Fluke 376 FC with 36-inch iFlex
Includes:
- Fluke 376 FC True-RMS Clamp Meter
- 36-inch iFlex® Flexible Current Probe
- TPAK magnetic hanging strap
- TL75 Test Leads
- Two AA batteries (Installed)
- Soft carrying case
- Coated instruction card
- Safety information sheet
FAQ:
1.Can you ship order to Canada or Australia ?
Yes,we can .We send orders worldwide .
2. What delivery method do you use ? and delivery time ?
We can ship by EMS,DHL,FedEx,UPS,TNT with tracking number. Usual
delivery time is 4-7 workdays.
3. What is your payment term?
100% T/T payment before shipment.
4. How can I ask any other question ?
You can contact us online or leave us messages below .
