M6, M8, M10, M12, M14,M16 PTFE coating U-bolt With Polyshrink ,4 Nuts and half round i-rod

M6, M8, M10, M12, M14,M16 PTFE coating U-bolt With Polyshrink ,4 Nuts and half round i-rod

Packing:

Packing Details :Construction fastener bags+cartons+pallets,or according to customer ' s requirement,
1. We have several sizes of packing dimensions, can be 25kg per carton;
2. For large orders, we can design specific sizes of boxes and cartons.
3. Normal Packing: 1000pcs/500pcs/250pcs per plastic bag,bags into cartons,then on pallet.
4. Can provide special packing as clients request;

Features and advantages

Easy installation: Construction workers only need to insert the opening of the U-bolt into the object to be fixed, and then tighten it with a nut to complete the installation. No cumbersome tools and complicated operation procedures are required, which can greatly improve construction efficiency.
Reliable fastening: Tightening the nuts at both ends can generate a strong clamping force, which can tightly fix the objects together, and maintain a stable fastening state even if they are subjected to vibration and pressure for a long time.
Flexible: It can adapt to the fixing needs of objects of different shapes and sizes. By adjusting the tightening degree of the nut and its own curvature, it can achieve a close fit and firm fixation with various objects such as round, square, and irregular shapes.
Good corrosion resistance: U-bolts with special surface treatments, such as galvanizing and nickel plating, can effectively resist oxidation and corrosion in outdoor environments or humid working conditions, and extend their service life.

Specifications

Nominal diameter: that is, the thread specification, in millimeters, common ones are M6, M8, M10, M12, M16, etc., which need to match the nut.
Pipe outer diameter: refers to the outer diameter of the fixed pipe or object, in millimeters. U-bolts of different specifications are suitable for pipes or objects with different outer diameters.
Bending radius: The radius of the U-shaped bending part, in millimeters, affects the fit with the pipe.
Total length: The overall length of the bolt, in millimeters.
Opening width: The net width of the U-shaped opening, in millimeters, which needs to be slightly larger than the outer diameter of the pipe.
Straight rod length: The effective length of the threaded section, in millimeters, which needs to meet the reserve after the nut is tightened.
Thread length: The length of the threaded part, usually 2-3 times the nominal diameter, in millimeters.

Material classification

Carbon steel: Such as Q235A, Q345B, etc., have high strength and hardness, relatively low price, and are widely used, but have poor corrosion resistance and are suitable for fixed connections in general environments.
Stainless steel: Common materials include 304, 321, 304L, 316, 316L, etc., which have good corrosion resistance and oxidation resistance and are suitable for corrosive environments such as moisture, acid and alkali.
Alloy steel: The addition of alloy elements such as chromium, molybdenum, and vanadium can further improve the strength, toughness and wear resistance of bolts, and is often used in occasions with high strength and performance requirements.

Application areas

Construction: Used for reinforcement and fixation in reinforced concrete structures, such as fixing formwork, tie steel bars, etc.; can also be used for pipeline installation, fixing water pipes, heating pipes, ventilation pipes, etc. on brackets.
Mechanical manufacturing: In various mechanical equipment, it is used to connect and fix parts, such as the installation and fixation of motors, reducers, pumps and other equipment, as well as the connection of mechanical transmission parts.
Automobile manufacturing: Widely used in the connection of automobile engine covers, doors, chassis and other parts, and also used to fix automobile exhaust pipes, leaf springs in suspension systems, etc.
Power engineering: Used to fix wires and cables on poles and towers, as well as the installation and fixation of busbars and transformers in power equipment.
Bridges and tunnels: In bridge construction, it is used to fix bridge structural members, such as box girders and piers; in tunnel projects, it can be used to fix ventilation ducts, cable trays, etc.

Other Type

Shaanxi Flourish Industrial Co., Ltd specializes in manufacturing and supplying various fasteners & some pipe fittings. Bolts, nuts, washers, screws, plugs, couplings,end dishes, gaskets and flanges round out our most popular categories, while our extensive collection of standoffs, pins and rivets are commonly purchased for use in construction.Most of our products are usually used in structural steel, metal building, oil&gas, photovoltaic, electricity, wind energy, mechanical machine and automobile etc. Due to different uses in many industries, we can cater to various requirements of our customers for materials,coating and sizes.

By the advanced production equipment and production technology, we can not only produce products that meet German, American and ISO standards,but also customize them according to purchasers' drawings or needs. More importantly, we also provide top-notch solutions for engineering projects related with our products.

Our quality products and efficient team service makes us continuous growth and also set up more business relationships with more customers in the world. All the products are mainly exported to Europe, Middle East and South America, Southeast Asia and Australia.Your esteemed company is welcome to join.

We sold our products in bulk quantities, generally for industrial use. Visit our website to explore our extensive range of products and see how we can meet your specific needs. We also offer online chat on our website for quick, convenient assistance.

What you really need is the direction in which we are working.