FL4835 Polymer Cliche Plate CTP Machine for Flexo Printing
Equipment Advantages
1,Using a high energy power fiber laser device, at 5080dpi,it only
takes 30 minutes to output a full image size of 50inch x B0inch
plate, it can also allow to increase the productivity by 10% for
urgent need, in this way, the customer can meet the deadline of
some urgent jobs
2,The unique independent modulating technology allows the laser to split into 256 channels with control ofeach channel which preatly increase
the productivity. The laser spot shape is rectangle type which can
deliver amuch better dot quality and performance of image output.
3,The H256 laser head use a new high power magnificationoptical
systemn to achiewe a 5080dpi optical resolution.
4, At 5080dpi, it can image slant or circular line as fine as15um;
for vertical and horizontal line, it can be as fine as5um. Each
image pixel is very sharp and clear. This can increase the color
fidelity by 30%.
6,The Laser head can also support 2540dpi output, lf the
requirement of imaging output is not critical,the mode of output
can be adjusted to double line overlapping exposure which can
greatly increase productivity to150%.
7,Voice coil motor device is used for dynamic auto focus
function,This can ensure accurate focus during exposure on the
non-unifor surface of fexo plate.
8,Double lines and triple lines overlapping functions can allow the
LAMS ablation with the superior image quality and efficiency for
flexo plate exposure.
9,Instanttemperature monitoring and pre calibration of laser head
can make sure the laser exposure stability and reliability.
This new generation of Light Valve Device can also allow1.to raise
the resolution to 10160dpi. At this super high resolution,the laser
spot size is 2.5umx2 5um and can image 5 or less um lines.
1. Specification
EcooSetter Flexo CTP FL-5080E
Laser Channel: 256-channel
Output Speed: 3~5 sqm/h
Max. Breadth: 50"×80"/1270mm×2032mm
Plate Thickness: 0.14mm - 6.35mm
Laser Power: High power semiconductor laser diode
Plate Type: Digital relief flexo plate (water-wash), Digital flexo
plate (water-wash), Digital flexo plate (Solvent-wash) Steel based
digital plates (water/ alcohol washable) are applied for EM/ SM
series
Application: Label and trademark
Resolutions: 4000dpi
Plate Loading: Manual load and unload
Interface: USB2.0
Focus adjust: Dynamic auto-focus
Device Size: 2,970×1,705×1,537
Net Weight: 2500Kg
Power: 220V/50Hz, 60Hz, mainframe 1.5KW + Vacuum 4.5KW
Environment: Recommended temperature: 18-30ºC Humidity: 10-80%
2. Major Highlights of EcooGraphix CTP machine
1) Superior dot quality reproduction proven by worldwide market:
1%-99% dot reproduction
Up to 250lpi screening ,4000 dpi or 2540dpi optional
2) Fully qualified: for any thermal non-process plate and process plates.
3) Robustness and simplicity: robust machine and easy to use. User friendly and simple design to
avoid human error.
4) Worldwide top class components and parts supplied by international
well known suppliers from Japan, USA, and Germany.
5) Long lifetime and warranty of parts: laser diodes lifetime at more
than 10,000 imaging hours. (approximately 20,0000 plates)
6) Long warranty of the machine: 3 years warranty (free replacement of all parts)
Low Cost of Parts: after 3 year warranty, very low cost of parts.
for example, laser diode at US$250 per piece.
7) Guaranteed Service: installation and training conducted by technical engineer from
factory, ensuring best setup and training to be achieved. Regular
remote maintenance to be conducted every 2 month. Proactively
revisit by engineers to be conducted. 7x24 hours service response.
8) Proven Worldwide market leader: (Some highlights installations)
Over 6000 units installed worldwide over past 10 years
USA and Canada: Over 50 units in USA and Canada in last 3 years by
leading US press manufacturer.
Turkey: 35 units installed in Turkey by Esen Graphics
Installations in other countries UK,Italy,Spain,Hungary,Russia,Mexico,Brazil,Colombia,Ecuador,South
Africa,Nigeria and etc.
2. Other similar Models
| EcooSetter Flexo CTP Series Technical Specifications |
| Model | EcooSetter | EcooSetter | EcooSetter | EcooSetter | EcooSetter | EcooSetter |
| FL-600E | FL-600S | FL-800E | FL-800S | FL- 4835E | FL-5080E |
| Laser Channel | 16CH | 32CH | 16CH | 32CH | 256CH | 256CH |
| Output Speed | 1.25 m2/h | 2.5 m2/h | 1.25 m2 /h | 2.5 m2 /h | 3m2 /h | 3 m2/h |
| Max.Breadth | 26'' x 17''/
680mm x430mm | 25"x30"/635mmx762mm | 48"×35"/1200mm×1020mm | 50"×80"/1270mm×2032mm |
| Min. Breadth | 100mmx100mm |
| Plate Type | Digital relief flexo plate(water-wash) ,digital flexo
plate(solvent-wash),steel based digital plate(water/alcohol
washable) are applied for EM/SM series |
| Plate Thickness | 0.14mm - 1.14mm | 0.14mm-1.7mm | 0.14mm-6.35mm |
| Application | Label and trademark | Paper box and soft packaging |
| Resolutions | 4000dpi , optional:3000dpi or 2540dpi |
| Plate Loading | Manual load and unload |
| Interface | USB2.0 |
| Focus Adjust | Dynamic autofocus |
| Laser Lifetime | >10000h |
Device Size
(WxDxH)mm | 1087x770x1000 | 1,630×1,170×965 | 2,315×1,370×1,052 |
| Net Weight | 400KG | 800KG | 2500KG |
| Power | Single phase: 220V/50HZ, 60HZ/3KW | Single phase: 200V/50HZ, 60HZ/4.5KW |
| Environment | Recommended temperature: 18-30ºC Hu m i dity: 10%- 80% |
Our Factory
FAQ:
1. What are your main products ?
Our main products are the Prepress 4up and 8up Online/Offline
Thermal CTP , CTCP , VLF CTP and CTCP, Flexo CTP , Processor ,
Offset Plates ,inks , blankets , postpress Packing equipments and
so on.
Our partners in USA,Canada,Mexico,Colombia,Turkey,Hungary,South
Africa and so on are very pleased with our Technician Support
service and product performance.
You can get the prepress equipment and consumables all in one and
no worry about the after-sales service from our company.
2. Where is your factory ?
Our CTP machine factory is located in Hangzhou city , which is
about 1.5 hour by train from Shanghai.
You are warmly welcomed to visit our factory!
3. What is your warranty for the CTPs ?
Three years' Laser Head and main spare parts for the CTPs, One year
for the Processor.
Lifetime Warranty for the CTP machine combined with the plates.
4. What is the Lead Time?
Usually 10-30 days, and we will try our best to meet your demands.
5. Can you also supply the Workflow and RIP?
Yes, we can provide the Workflow Brain New and RIP Compose V13.
6. What about the Installation and after-sales technician support?
Our engineer can go to help the installation and provide the
necessary training. The buyer should take the round air plane
tickets and service charge and the local accommodation cost. Any
problems or questions,we will available for technical support for
7x24 hours.
