280T Smart Operating Cabin With Real-time Monitoring Horizontal
Directional Drilling Rig
Product Overview:
National Stage III-compliant 390kW Weichai turbocharged common rail
diesel engine, delivering 530 horsepower. It maintains stable
performance in extreme conditions ranging from -40°C to 50°C. The
hydraulic system employs a closed + open dual-circuit intelligent
load distribution system, ensuring optimal performance for
propulsion, retraction, and rotation in complex conditions. Thrust
and Pullback system features a 280-ton 6- stage gear -rack drive
with a 3 step-less adjustable transmission ,effortlessly navigating
complex terrains. Its tracked chassis conquers 30°slopes with ease.
The rotation system delivers 60,000 Nm ultra-high torque and a
25,000 Nm rapid retraction mode, enabling "single-pass drilling"
efficiency ,which reduces construction duration by over 30%.
Auto-centering clamping rotary gripper with 70,000 Nm make-up
torque and 140,000 Nm breakout torque ,accelerating rod changes by
40 seconds . Onboard crane, smart operating cabin with real-time
monitoring of over ten data points. while the dual-control
(wireline +manual) emergency walking system, combined with an
expansive operational field of view, , safety and operational
efficiency are prioritized.
Typical Applications:
Urban and rural telecom cable installation
Gas and water pipeline crossings under roads or rivers
Electrical duct laying in congested areas
Medium-length municipal infrastructure projects
Optional Configurations:
Drill rods in various lengths and diameters
Customizable operator’s cabin
GPS-based tracking system
Onboard mixing and mud recycling system
THD－280 Horizontal Directional Drilling Machine
Main Technical Parameters
Push/Pull Drive
Max Push/Pull Capacity : 6 gears, 280 tons
Push/Pull System: Rack and pinion,
4 Gears driving ; 3 step-less adjustable
I gear: 8 m/min
II gear : 18 m/min
III gear: 30 m/min
Rotation
Rotary system: gear drive, 2 step-less speed regulation.
Max. Rotation Torque
I gear: 60000Nm @ 40r/min
II gear: 25000Nm @ 100r/min
Engine Power
Manufacturer:Weichai Power Co.,Ltd.
Rated value:390kw/2100r/min
Operation condition: Push/Pull and rotation can meet the rated
maximum performance indexes listed above.
Hydraulic System
Rotary push-pull closed system, auxiliary circuit adopts open load
sensing system.
Operation room
Double - occupancy operation room, built - in worktable with main
machine
Crawler
Caterpillar chain rail form
Crawler climbing Angle: 25 degrees
Crawler traveling Speed: 2.5km /h
Mast
Mast welding type structure, mast can be raised at the front for
the convenience of the machine
Angle of mast penetration: 8°~ 16°
Crane
3T straight arm crane, working radius 6m.
Drilling Rod
Drill pipe length up to 6 meters, diameter of 127mm screw NC50, OD
of Adaptor :165 to 168mm
Foot Clamp:
Foot clamp: Adjustable spacing, accurate, stable and reliable
shackle.
The shackle automatically centralizes and holds the shackle
Max. Making Torque: 70000Nm
Max. Breaking Torque: 140000Nm
Accessories: pressure, flow, speed and other more than 10 items of
data are directly indicated in the operating room, easy to analyze
and judge the application situation.
Main machine weight :34 Ton
Dimension:12.5 mX3.15mX 3.3m
