| Parameter | FL30 | FL50 | FL100 |
| Machine Material | Sandblasted Oxidized Aluminum Structure |
| Laser Source | Fiber Laser Generatorwith aservice life of over 80,000 hours |
| Laser Wavelength | 1064nm |
| MarkingSpeed | ≤12000mm/s |
| Main Control | 10.2-inch Touch Controller |
| Cooling System | Air-cooled at room temperature |
| Focusing Lens | Optional,Focal Length165mm |
| Minimum Line Width | 0.0012mm |
| RepeatPositioning Accuracy | 0.003mm |
| Marking Range | 110mm×110mm(Optional) |
| Positioning Method | Red Light Focusing |
| Number of Marking Rows | Any within themarkingrange |
| Production LineSpeed | 0~130m/min(Dependenton material) |
| Languages | English,French,Spanish,German,Chinese,Russian,Arabic,etc. |
| User Management | Multipleuser management permissions |
| Operating System | Linux |
| Marking Modes | Static,Dynamic,Encoder |
| Reserved Signals | Startprinting,Printing status,Printing complete,Fault alarm |
| Data Protection | Power-off data protection function |
| Missed Mark Detection | Provides overspeed alarm function duetomaterial reflectivity |
| Cross Point Removal | Automatic removal ofcross points to avoid overlapping |
| Printing Software | Supports singleand doublemachine coding |
| Fonts | Standard fonts in Chinese,English,numbers,traditional
characters,etc. |
| File Formats | BMP/DXF/HPGL/JPEG/PLT |
| Barcodes | CODE39,CODE128,CODE126,QRCode,Datamatrix(optional) |
| Power Supply | 220V/50HZ |
| Maximum Power Consumption | 400W |
| MachineNet Weight | Split machine:25kg,Integrated machine:17kg:Flying bracket part:22kg |
| Dimensions | Mainbodyof thesplit machine:465X220X332mm Integrated
machine:650X195X265mm Opticalpath section of thesplit
machine:625X102X110mm |
| Environmental Requirements | Extemaltemperature0℃-45℃;Humidity≤95%;Non-condensing:Novibration |
