1. Description of Double Twin Shaft Agravic Paddle Mixer.
Zhengzhou MG double twin shaft paddle mixer have the characters of
high mixing speed, high uniformity, less power consumption.
Materials with large differences in physical properties such as
specific gravity, particle size, and shape do not easily segregate
when mixed in the mixer. The material discharge is by pneumatic
control, material can be discharged within 3-5 seconds.
2. Advantages of Double Twin Shaft Agravic Paddle Mixer.
1. High mixing speed, 3-5 minutes per batch, with high uniformity;
2. Less segregation when mixing material in very different
proportion, size and shape, etc.
3. Additional fly-cuter system with high speed rotation can crush
fiber material efficiently in short time.
4. Less electricity consumption per ton, 60% energy reduction
compared with ordinary ribbon mixer.
3. Product Configuration of Double Twin Shaft Agravic Paddle Mixer.
| Model | Mixing Speed | Power | Volume of Drum | Capacity | Size |
| 2m³ | 3-5 minutes | 18.5 KW | 2m³ | 1 T/Batch | 2440*2070*1630mm |
| 3m³ | 3-5 minutes | 22 KW | 3m³ | 1.5 T/Batch | 2800*1710*1650mm |
| 4m³ | 3-5 minutes | 30 KW | 4m³ | 2 T/Batch | 3120*2080*1800mm |
| 6m³ | 3-5 minutes | 37 KW | 6m³ | 3 T/Batch | 3170*2470*2100mm |
| 10m³ | 3-5 minutes | 55 KW | 10m³ | 5 T/Batch | 3550*2900*2500mm |
4. Working Principle of Automatic Weighing Dry Mortar Mixing Plant.
Double Twin Shaft Agravic Paddle Mixer adopts the paddle blades
inner structure. Different proportion materials can achieve best
mixing performance through lose weight instantly at the critical
parabolic rotate speed, while the mixing time can be shorted in a
large extent at the violent turnover mode. Therefore the twin shaft
agravic mixer can be widely applied in dry mortar production lines.
5. Raw Materials of Automatic Weighing Dry Mortar Mixing Plant.
1. Cementing materials: cement, lime, gypsum.
2. Aggregate: yellow sand, quartz sand, limestone, dolomite, expanded perlite,
etc.
3. Mineral admixture: industrial byproduct, industrial slag, fly ash, pozzolana, fine
silica powder, etc.
4. Water-retention and thickening material.
5. Chemical additives.
6. Application of Automatic Weighing Dry Mortar Mixing Plant.
Bonding mortar: Masonry mortar, wall and floor tile glue mortar, ceramic tile
adhesive mortar, tile joint mortar, anchorage mortar etc.
Decoration mortar: Decorative plaster mortar, inner and outer wall putty mortar, skim
coat mortar, colorful decoration mortar etc.
Protection mortar: Water-proof mortar, anti-corrosion mortar, self level mortar, wear
resistance mortar, thermal insulation mortar, sound insulation
mortar, repair mortar, anti-crack mortar, mildew-proof mortar,
shielding mortar etc.
7.Our company.
8. FAQ
1. How is the quality of your products?
Our machines are manufactured strictly according to national and
international standards, and we will assemble and test all the
equipment and pack them carefully before delivery. We have exported
to lots of countries around the world, such as Australia, Malaysia,
India, Indonesia, Vietnam, etc. You can rest assured with the
quality absolutely.
2. What is your business model? Trading company or factory?
We are a factory with our own mechanical design engineers and
project design engineers, all our machinery are manufactured by
ourselves.
We can provide customized solution design according to customer
needs, and full-process services such as early project
communication, scheme design, equipment selection, equipment
production, site planning, equipment layout, transportation and
delivery, installation and commissioning.
3. What product can this production line make?
Our automatic dry mortar production line can make all kinds of dry
mortar, such as wall putty, plaster, gypsum mortar, cement mortar,
skim coat, ceramic tile adhesive, tile glue, tile grout, tile
joint, and so on.
4. Do you provide equipment operation training?
Yes. All of our engineers have passports. We can send experienced
engineers to the customer's site to guide equipment installation,
debug the production line until it is put into production, we will
also provide installation instructions, layout drawings, assembly
drawings, etc. If the customer has his own engineer, he can install
the equipment according to the installation steps drawings we
provide, and we can also guide the installation with online videos.
5. Can I visit your factory?
Yes! Welcome to visit our factory, many domestic and international
customers visit our factory every year. We can provide you the
invitation letter required for visa application. We will meet you
at the airport or station and provide professional business
reception services.
6. Do you provide after-sale service?
Yes. The warranty period of our machines is 12 months, and we have
a professional after-sale service team to promptly and thoroughly
solve your problems.
If you are interested to our dry mortar production line, please
feel free to send us inquiry or leave your contact number for us.
