System composition
Camera: It is the image acquisition device of the system, usually installed in the front, rear, side or top of the forklift, used to capture the environment around the forklift. Night vision cameras generally use special photosensitive elements and lenses to enhance imaging capabilities under low light conditions.
Display: Installed in the forklift cab to display the images captured by the camera. The display usually has high brightness, high contrast and good viewing angle so that the driver can see the picture clearly under various light conditions.
Signal transmission device: Responsible for transmitting the image signal collected by the camera to the display. The wired transmission method transmits signals through cables, and the signal is stable, but the installation is relatively complicated; the wireless transmission method uses wireless communication technology, such as Wi-Fi, Bluetooth or dedicated wireless frequency bands, etc., which has the advantage of convenient installation, but there may be problems with signal interference.
Power supply: Provides power support for devices such as cameras and displays. It can be connected to the forklift's power system or use an independent battery pack. Some systems also have battery charging management functions to ensure that the equipment can continue to obtain power during work.