1. Ultra-thin design (0.1 mm)
Material savings of 50% (compared with conventional 0.2-0.5mm),
compatible with high-pressure electrolysis tanks (30 bar), 20%
higher volumetric efficiency.
2. Extreme corrosion resistance
Titanium alloy (TA1) is resistant to strong acids/alkalis (pH 14,
1M H₂SO₄), and the metal dissolution rate of the nano-passivation
layer is less than 0.01 mg/cm²/year.
3, Efficient conductivity
Laser-etched runner, contact resistance less than 5 mΩ-cm² (1.5
MPa), electrolysis efficiency greater than 85.
4, Lightweight and durable
Density <4.5 g/cm³ (40% lighter than stainless steel), fatigue
resistance >10⁶ pressure cycles, no micro-cracks.
5, Mass production economy
Precision stamping (tolerance ±0.01mm), fully compatible with
electrolysis technology (PEM/AEM/Alkaline); significant life cycle
cost reduction, no risk of coating deterioration.
