Specifications
| Working mode | single pulse, continuous pulse, repeated pulse, ultra pulse |
| Output power | 0-60W(adjustable) |
| Input power | 450VA |
| Laser type | Sealed-off CO2 laser |
| Laser wavelength | 10.6μm |
| Divergence angle | 4mrad |
| Focused spot diameter | ≤0.4mm |
| Tool bit focus | F=100mm(optional) |
| Pulse width | 0.1ms-10ms |
| Aiming beam | Red diode laser(650nm, 2mW) |
| Transmission system | Spring-balanced 7 joint arms |
| Cooling system | Inside-circle coolant |
| Display screen | 12.1 color touch screen |
| Working environment temperature | 5-40ºC |
| Humidity | <80% |
| Air pressure | 86Kpa-106 Kpa |
| Input power | AC220V±10%, 50Hz |
| Preheating-time | >5min |
| Electromagnet | No electromagnet interrupt |
| other working environment | No obvious shaking or airflow |
| N. W./G.W | 39kgs/56kgs |
| Pack size | 116 ×56×47cm |
Principle of CO2 fractional laser machine
The wavelength of CO2 laser is 10.6μm, which can be fully absorbed
by human biology tissue (all the skin are available).
The sealed-off fractional CO2 laser, whose output laser-light will
be transferred by articulated arm, which has better sense of
direction and higher energy density.
The CO2 laser operates in the invisible infrared waveband, and an
aiming beam is required to see where the treatment beam will impact
tissue more recently from a visible red diode laser. When the laser
beam go through the focus lens, the produced heat will gasify the
target tissue.
With fractional laser resurfacing the laser beam is broken up or
fractionated into many small micro beams which are separated so
that when they strike the skin surface small areas of the skin
between the beams are not hit by the laser and left intact. These
small areas of untreated skin promote a much more rapid recovery
and healing with less risk of complications. The small areas
treated by the fractional micro beams, called micro treatment
zones, cause sufficient laser injury to promote new collagen
production and resultant facial skin rejuvenation.
Applications of CO2 fractional laser machine
Skin resurfacing (Rough skin, coarse pores, dark skin, light
damage…)
Wrinkles (Crow's feet, head lines, Sichuan characters, Decree
lines)
Pigmented nevus, epidermal pigmentation (freckles, etc.), epidermis
(all kinds of warts) cutting
Scar Repair (acne scar, hypertrophic scar, burn scar, sunken scar,
etc.)
Other applications (syringoma, condyloma, seborrheic, etc.)
Viginal care (Vaginal wall tightening, collagen remodeling, thicker
and more resilient, labium whitening)
Advantage of CO2 fractional laser machine
1.Easy Drawing regular & irregular shapes for different area
treatment
2.Ultra-Short Pulse Duration make sure safety and comfortable
treatment
3.Various indications with one machine
4.Adjustable spot density to meet versatile treatment
5.Easy setup and quick treatments
