Better PVC Price Tag Extruder Plastic Profile Extrusion Production
Line
Product Description
This line is applied for extruding pvc wide panel profile. The
output can be up to 3.2m/min. We adopt laminating process instead
of embossing which is more convenient and flexible.
Processing Process
The process flow of this line is PVC powder + additive —
mixing—material feeder—twin screw extruder— mould—calibration
table—haul-off machine—laminating process—cutting machine—discharge
rack.
Our wide panel extrusion line adopts conical twin screw extruder,
which has degassing system to ensure the excellent material
plasticization. The mould and calibration table adopt wearable
material; the haul-off machine provide constant force running
stably; our laminating process is full of oil to increase
lubrication. We adopt rotary knife to ensure the fixed length of
the panel profile.
Specifications
| Model | LB180 | LB240 | LB300 | LB600 |
| Max width of products(mm) | 180 | 240 | 300 | 600 |
| Screw Model | SJ55/110 | SJ65/132 | SJ65/132 | SJ80/156 |
| Motor power | 22KW | 37KW | 37KW | 55KW |
| Cooling Water(m3/h) | 5 | 7 | 7 | 10 |
| Compressor(m3/h) | 0.2 | 0.3 | 0.3 | 0.4 |
| Total length(m) | 18m | 22m | 22m | 25m |
Product detail
Conical Twin Screw Extruder
The screws are specifically designed and manufactured for the
processing of dry pvc powder. High quality screws and barrel
ensures long service time. Equipped with PLC control system on the
board, it realized controlling the whole production line in the one
site.
Plate Mould
Our profile mould has high flow performance due to the delicate
channel design. Our mould is manufactured and inspected by advanced
engineer with highest precision.
Calibration table
We have multi-dimension position adjustment system. With precious
layout of water pumps and adequate calibration table, the wide
panel will be rapidly shaping and cooling.
Haul-off machine
The force distribution along each caterpillars has sufficient
hauling force. We offer good-quality rubber for the haul-off
machine.
Rotary knife cutter
We offer rotary knife cutter for the wide panel extrusion line. It
runs on the line track at the designated length of the panel. With
its fast running on, the panel was cut. The whole cutting process
is clean and easy-operation.
Pneumatic stacker
We offer stacker robot for the production line. It will pick up the
cut and laminated wide panel from the board to the stacking area.
