New Design LTO 24V3.9Ah Photovoltaic Tracking System Tracker Sun
Power Clean Energy Ground Solar Power Generation
LTO batteries: properties
LTO batteries are lithium titanate (Li2TiO3) or li-titanate batteries.They are high power batteries, so they
are perfect for use in the fast charging stations. Lithium titanate
battery by the authority of the third party test found that in the
needle, extrusion, short circuit and other stringent tests, no
smoke, no fire, no explosion.
Track the Sun, Capture More: Ecolite Smart Solar Tracking Systems
Advantages:
1. Increased Energy Production: By following the sun's path, solar
tracking systems significantly increase the amount of sunlight
captured, leading to higher energy yields.
2. Cost Savings: Over time, the additional energy generated can
lead to substantial savings on energy bills and a faster return on
investment.
3. Eco-Friendly: Contributes to a cleaner environment by harnessing
more solar energy and reducing reliance on fossil fuels.
4. Space-Efficient: Optimizes the use of available space, making it
ideal for areas with limited land availability.
5. Cost-Effective in the Long Run: Although the initial investment
may be higher, the increased energy output can lead to a quicker
return on investment and long-term savings.
6. Future-Proof Investment: Investing in solar tracking systems is
a forward-thinking choice that aligns with the growing demand for
renewable energy solutions.
Ecolite Solar Tracking System implements distributed actuation
architecture, enabling each row to be independently controlled by
its own motor with the tracking method “Astronomical algorithm +
closed-loop control”. making the system accurate and
reliable,real-time closed-loop feedback tracking angle, automatic
tracking, without human intervention.
Three views of product
Product specification
Lithium Titanate(LTO) ECOLTO2403(24V3.9Ah)
|
| Electrical Parameters | Mechanical Parameters |
| Nominal Voltage | 24V | Dimension(L×W×H) | 216x77x57mm |
| Rated Capacity | 3.9Ah | 8.50x3.03x2.24" |
| Energy | 93.6Wh | Weight | 1.1kg |
| Resistance | ≤ 55mΩ | Terminal Type | FASTON 187,FASTIN-FASTON 250 |
| Efficiency | 0.98 | Battery Housing | PVC |
| Cycle Life(25℃,1C/1C,100％DOD) | >10000cycles,Remaining capacity＞80％ | Housing Protection | IP20 |
| Self Discharge | ＜5% per Month | Cell Type-Chemistry | LTO Cell |
| Cell in Series/Parallel | 10S/3P | NTC | JST PAP-02-V |
| Discharge Parameters | Charge Parameters |
| Continuous Discharge Current | 12A | Charge Method | CC-CV |
| Pulse Discharge Current | 30A (<1S) | Charge Voltage | 27.5V-28V |
| Recommended Volt. Disconnect | 15V | Recommended Float Voltage | 27.0V-27.5V |
| BMS Discharge Cut-off Voltage | 17V | Recommended Charge Current | 4A |
| Reconnect Voltage | 18V | Maximum Charge Current | 8A |
| Short Circuit Protection | 200-500us | BMS Charge Cut-off Voltage | 28.5V |
| Temperature Parameters | | |
| Discharge Temperature | -40 to 65 ℃ | | |
| Charge Temperature | -40 to 65 ℃ | | |
| Storage Temperature | 0 to 45℃ | | |
| BMS High Temperature Cut-off |
65 ℃
|
