Product Description
MK1Q-BDTD-B30/MK1Q-BDTD-B03 100G single fiber optical transceiver
module are designed for operating on 100 Gigabit Ethernet links
over 40km single mode fiber. The module incorporates one channel
optical signal on 1304nm and 1309nm wavelength. Compliant with the
QSFP28 MSA. Digital diagnostics functions are available via the I2C
interface, as specified by the QSFP28 MSA.
Features
- Support line rates from 103.125 Gb/s;
- Transmission data rate up to 25.78125Gbps per channel;
- Up to 40km transmission on single mode fiber;
- LAN WDM DML laser and APD;
- High speed I/O electrical interface (CAUI-4);
- I2C interface with integrated Digital Diagnostic monitoring;
- QSFP28 MSA package with duplex LC connector;
- Single +3.3V power supply; dissipation
- Commercial:< 4.5W
- Industrial:<5.5W
- Temperature Range: Commercial:0°C ~+70°C Industrial:-40°C ~+85°C
- Complies with EU Directive 2015/863/EU;
Applications
- 100GBASE-ER4 Ethernet
- 100G Datacom& Telecom connections
- 100G 4WDM-40
Technical Parameters:
| Product Attribute | Parameter |
|---|
| Tx Wavelength | TX1310nm |
| Receiver Type | APD |
| Max Transmission Distance | 40km |
| Maximum Data Rate | 103.1Gbps |
| Connector Type | Duplex LC |
| Transmitter Type | EML |
| Power Supply | 3.3V, 5V |
| Operation Temperature | 0 To 70°C |
| Package Type | QSFP28 |
| DDM Support | Yes |
Absolute Maximum Ratings
| Parameter | Symbol | Min. | Typical | Max. | Unit | Notes |
| Storage Temperature | TS | -40 | - | +85 | °C | |
| Supply Voltage | VCC | -0.5 | - | +4.0 | V | |
| Operating Relative Humidity | RH | - | - | +85 | % | |
Recommended Operating Conditions
| Parameter | Symbol | Min. | Typical | Max. | Unit | Notes |
| Operating Case Temperature | TC | 0 | - | +70 | °C | |
| Power Supply Voltage | VCC | 3.13 | 3.3 | 3.47 | V | |
| Power Supply Current | ICC | - | - | 1.36 | A | |
| Maximum Power Dissipation | PD | - | - | 4.5 | W | |
| Data Rate(optical) | DRo | - | 103.125 | - | Gb/s | |
| Transmission Distance | TD | - | - | 40 | km | Over SMF |
Optical Characteristics
| Parameter | Symbol | Min. | Typical | Max. | Unit | Notes |
| Transmitter |
| Signaling Speed per Lane | | | 25.78125 | | Gbps | |
Lane Wavelength | L0 | 1294.53 | 1295.56 | 1296.59 | nm | |
| L1 | 1299.02 | 1300.05 | 1301.09 | nm | |
| L2 | 1303.54 | 1304.58 | 1305.63 | nm | |
| L3 | 1308.09 | 1309.14 | 1310.19 | nm | |
| Total Average Launch Power | PT | | | 12.5 | dBm | 1 |
| Average Launch Power per Lane, | Pavg | 0 | | 6.5 | dBm | 1 |
| OMA, each Lane | POMA | 0 | | 6.5 | dBm | 1 |
Difference in launch power between any two lanes(Average and OMA) between any Two Lanes (OMA) |
Ptx,diff | | |
3 |
dB | |
Average Output Power (Laser Turn off) | Poff | | | -30 | dBm | |
| Side Mode Suppression Ratio | SMSR | 30 | | | dB | |
| Extinction Ratio | ER | 4.5 | | | dB | |
| RIN20OMA | RIN | | | -130 | dB/Hz | |
| Optical Return Loss Tolerance | TOL | | | 20 | dB | |
| Transmitter Reflectance | RT | | | -26 | dB | |
| Optical Eye Mask | {0.25,0.4, 0.45, 0.25, 0.28, 0.4} | % | 2 |
| Receiver |
| Signaling rate, each lane | | | 25.78125 | | Gbps | |
| Center Wavelength Lane 0 | λ0 | 1294.53 | 1295.56 | 1296.59 | nm | |
| Center Wavelength Lane 1 | λ1 | 1299.02 | 1300.05 | 1301.09 | nm | |
| Center Wavelength Lane 2 | λ2 | 1303.54 | 1304.58 | 1305.63 | nm | |
| Center Wavelength Lane 3 | λ3 | 1308.09 | 1309.14 | 1310.19 | nm | |
| Damage threshold , each lane | Pdamage | -2.5 | | | dBm | |
Average Receive Power, each lane | | -23 | | -3.5 | dBm | |
| Receiver sensitivity, each lane | SEN | | | -16 | dBm | 3 |
| Los Assert | LosA | -30 | | | dBm | |
| Los De-assert | LosDA | | | -22 | dBm | |
Applications
MK1Q-LRTE is designed for 40km optical communication applications.
This module contains 4-lane optical transmitter, 4-lane optical
receiver and module management block including 2 wire serial
inter-face. The optical signals are multiplexed to a single-mode
fiber through an industry standard LC connector.
Support and Services
With the rapid development of optical communication and
interconnection network in recent years, users’ demand for networks
has also surged in line with the trend, which has led to the
traffic of telecom backbone networks growing at a rapid rate of 50%
to 80% per year. In order to meet the needs of users, the
transmission rate of optical communication also increased
development, from the previous 10G, 25G, and 40G development to
today’s 100G, 200G, 400G, etc. Although 100G optical modules have
become the mainstream of the market, the requirements for
bandwidth, port density, and the amount of energy consumed by the
system are still increasing, which further drives the technology to
200G, 400G, or higher speed systems.
Optowix Transceiver Team can provide technical support and services
to ensure that our customers' products and systems are running
correctly and efficiently.
We offer a range of services such as troubleshooting, installation,
and maintenance. Our team of expert engineers is available 24/7 to
answer any questions or provide assistance. We also provide on-site
support for emergency situations, and can provide custom solutions
to meet specific needs.
We offer a range of warranty options to ensure your Fiber Optical
Transceivers are covered for the period of time you need them. We
also offer extended warranty plans for longer-term coverage.
Our commitment to customer service is second to none. We strive to
provide prompt, responsive service and are always available to
answer questions or provide assistance.
