Smt Pcb Glue Dispenser Dispensing Machine Robot electronic production line

Ask Lasest Price
Brand Name :	HXT
Model Number :	D450S
Certification :	CE
Price :	14000-21000
Payment Terms :	T/T
Supply Ability :	The production capacity is 100 units a month
Delivery Time :	7-20

Add to Cart

High Precision Online Ccd Visual Smt Pcb Automatic Uv Underfill Glue Dispenser Dispensing Machine Robot

Description

The dispenser mainly includes the following aspects:
Fixed electronic components: a dispenser can be used to fix the contact parts of electronic components on a fixed circuit board, such as diodes, chips, and inductors, as well as the wiring harness and interface.
Fusing small products: it is often used to glue all kinds of small products, such as some parts of toys, some modules of electronic products, product trademarks, and some decorations.
Circuit board coating: apply glue to cover a circuit board to make it waterproof, dustproof and heat-dissipating, usually for small-area products.
Encapsulation application: seal whole or part of a product with glue, such as the encapsulation of battery, diode, Chip, and circuit board.
Application: pour glue into your product to protect your internal equipment and to prevent water and heat, such as the Charger's charging head, or a new-energy car battery case.
Application: use the dispenser to color products. It is widely used in the fields of craft jewelry, medal insignia and precision hardware.
Application: it is mainly used in crystal and epoxy. By dripping, you can increase the volume and gloss of your products and protect them.

D-series glue dispenser has advanced design suitable for various production environments, and has obvious advantages of high cost performance. Comprehensive configuration to meet the dispensing needs of substrates and substrates of different specifications. Adopt non-contact injection valve to ensure the uniformity of dispensing, increase productivity and save material loss. Combining various dispensing technologies to customize personalized solutions for customers.
Comprehensive Ability
Minimum point diameter: 0.2mm
Minimum wire diameter: 0.25mm
Overflow width: 0.1mm
Minimum dispensing volume: 2nl

Type	D450S
Overall Machine Size	L950W1200WH1600(MM)
Control Method	PLC + motion control card
(xyz) Dispensing area	X=450mm Y=450mm Z=50mm
Drive method	Scrvo motor + ball scrcw (optional linear motor)
Max. running speed	1000mm/S
Positioning accuracy	±0.02mm
Repeat positioning accuracy	±0.02mm
Nozzle matched	1 set (lt is equipped with double standard valve, and can be equipped with doublevalve).
Nozzle heating	Ambient Temperature-~100℃
Communication port	SMEMA
Scanner port	232 port
Programming mode	offline or online visual programming
Input voltage	220V 50/60HZ
Air input	0.6MPa
Total Power	2.4KV
Total weight	650KG
Optional Items
Nozzle	Pneumatic injection valve, pressure point injection valve, screw valve, etc.
Analytical balance	Date Dreading accuracy 0.001mg
Laser height measure	Automatic Laser height detection can automatic z-axis height after deformation. if component deformation.
Work piece heater device	Working zone heating, ambient temperature -120°C ± 0.3°C

Product Tags:

*From:
Your email address is incorrect!
To: Shenzhen Hongxinteng Technology Co., Ltd.
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!


*From:	Your email address is incorrect!
*To:	Shenzhen Hongxinteng Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!