PCB Cutting Machine Manual for Aluminum Substrate Separator
V-groove Separator Routing Machine HXT-750 SMT Cutter Machine For SMT Assembling Line Production
Standard Equipment Introduction
Features:
1. The HXT-750 splitting machine adopts six sets of cutters to cut
step by step to minimize the shear stress, and is equipped with a
deformation control device. The edge of the divided substrate is
smooth and smooth, and the board surface is very flat, neither
twisted nor warped, with a tolerance of 0.6mm The left and right
ultra-thin aluminum substrates can still perfectly control their
deformation in the two wires, which meets the strict requirements
of the glass tube process on the degree of deformation.
2. Due to multiple cuts, the cutting process is very stable, which
greatly improves the positioning ability of the V-CUT groove. Even
if the V-CUT groove is very shallow on the circuit board, the V-CUT
groove will not jump out of the guide knife. Circumstances to avoid
defective products.
3. All cutting blades are calibrated with a laser dual-frequency
laser interferometer to ensure that the back knife can accurately
continue cutting in the groove cut by the front knife. The runout
of the knife tip is not more than 0.02mm to ensure perfect cutting
quality.
4. A stainless steel platform with laser scale positioning function
can be added (1.2m or 2.4m optional).
Product Specification
Machine Specifications: | 490mm x 400mm x 350mm |
Plus platform size: | 1200*450*350 / 2400*450*350 |
Maximum sub-board length: | Unlimited |
Splitting speed: | 80, 120, 200, 400mm/sec |
Power: | 60W |
Tool material: | SKD61 high speed steel |
Board thickness: | 0.2-5mm |
Machine weight: | 1.2M—41KG; 2.4M—50KG |
Power supply: | 230V/50Hz (110V/60Hz) |
Product details
HXT-750 Application:
The 750 splitting machine uses six sets of cutters to cut step by
step to minimize the shear stress, and is equipped with a
deformation control device. The edge of the divided substrate is
smooth and smooth, and the surface of the board is very flat,
neither twisted nor warped, with a tolerance of 0.6mm The slitting
of the left and right ultra-thin aluminum substrates can still
perfectly control the deformation in the two wires, which meets the
strict requirements of the glass tube process on the degree of
deformation. Due to multiple cuts, the cutting process is very
stable, which greatly improves the positioning ability of the V-CUT
groove. Even if the V-CUT groove is very shallow on the circuit
board, the V-CUT groove will not jump out of the guide knife. avoid
bad.
a. Mainly used in electronics, electrical appliances, lighting,
medical, new energy vehicles, automobiles and other electronic
technology industries.
Applications:
Widely used in electronics manufacturing, consumer electronics,
automobile electronics, communications equipment, aerospace,
medical equipment, LED lamps, computers and peripherals, smart
home, smart logistics, miniature and high power ratio electronic
devices.
