0.5–1.6 m3 /h Veolia MK-3MiniHT EDI Small Footprint Pure Water Solution

0.5–1.6 m3 /h Veolia MK-3MiniHT EDI Small Footprint Pure Water Solution

Veolia Suez EDI Stacks MK-3MiniHT For Pharmaceutical purified water

Product Highlights​​

• ​​Space-Saving Design​​: 30% smaller footprint than standard EDI stacks (500×400×300mm)
• ​​HT Sanitizable​​: Validated for 80°C thermal cycles (EN 285 compliant)
• ​​Pharma-Grade Output​​: Consistent >16 MΩ·cm resistivity (meets USP<645>, EP)
• ​​Modular Configuration​​: Stackable design for 0.5-2 m³/h systems

​​Technical Specifications​​

​​Key Applications​​

✓ ​​WFI Polishing​​: Final purification stage for Water for Injection
✓ ​​Biopharma​​: Buffer preparation, media dilution
✓ ​​Lab Water​​: Feed for HPLC, LC-MS analyzers

​​Competitive Advantages​​

• ​​Zero Chemical Use​​: Eliminates acid/caustic regeneration
• ​​Quick-Change Cartridges​​: <15 min stack replacement
• ​​Aquavanti™ Ready​​: IoT performance monitoring via Veolia's platform

​​Compliance & Certifications​​

• FDA 21 CFR Part 11 (data integrity)
• CE Marked (PED 2014/68/EU)
• Materials USP Class VI tested

---

​​Why Choose MK-3MiniHT?​​

1. ​​Validated for Annex 1​​: Ideal for EU GMP Grade C/D areas
2. ​​30% Lower Energy Use​​ vs. conventional mixed-bed DI
3. ​​Reduced Validation Costs​​: Pre-approved IQ/OQ documentation pack

Quality Assurance

• CE, RoHS, CSA and EAC marked

• Materials in contact with fluids processed by the E-Cell MK-3MiniHT stack meet FDA requirements

• Certified with UKCA

• Manufactured in an ISO 9001 and ISO 14001 facility

• E-Cell MK-3MiniHT Stacks are Halal certified by the Islamic Food and Nutrition Council of America (IFANCA®)

Parameter data

Brand	Veolia EDI
Exchangeable ppm	68.2
Inlet Pressure bar	6.9
Inlet Pressure psi	100
Max Temperature °C	40
Max Temperature °F	104
Pressure drop bar	1,4-2,8
Pressure drop psi	20-40
Recovery %	up to 93 %
Conductivity µs/cm	<117
pH range	4-11
Flow m3/h	1.14
Flow rate gpm/ft2	5
Power voltage V	0-150 VDC
Shipping Weight kg	57
Shipping Weight lbs	126
Application	Water for injection, Pharmaceutical, Laboratory

Please see below for detailed parameters

The following figure shows GE, Suez and Veolia from left to right (all the same product: Veolia EDI Module)

The E-Cell MK-3MiniHT's product water is ideally suited for small-scale industrial applications, where it exceeds the quality standards required by USP, EP, and other pharmacopeias. It is reliable for use in various applications such as water for injection, pharmaceutical purified water, and laboratory purified water systems. To facilitate the design process and further enhance confidence in your EDI application, Veolia provides performance projections and guarantees for the E-Cell through the Winflows* software or by direct contact. This ensures that you can confidently integrate the E-Cell MK-3MiniHT into your water purification needs with ease and precision.

Quality Assurance for the E-Cell MK-3MiniHT Stack is rigorous, adhering to multiple international standards and certifications. The product holds CE, RoHS, CSA, and EAC markings, ensuring compliance with various safety and environmental regulations. All materials in direct contact with the fluids processed by the E-Cell MK-3MiniHT stack fulfill the requirements set by the FDA, guaranteeing food-grade safety. Additionally, it is certified with UKCA, reflecting its conformity to British standards.

Manufactured in a facility that adheres to ISO 9001 (quality management) and ISO 14001 (environmental management) standards, the E-Cell MK-3MiniHT Stack further demonstrates its commitment to excellence in both product quality and environmental sustainability. Furthermore, the stack has been Halal certified by the Islamic Food and Nutrition Council of America (IFANCA®), validating its suitability for use in applications catering to Halal dietary restrictions. This comprehensive suite of quality assurance measures ensures that the E-Cell MK-3MiniHT Stack meets the highest standards of safety, quality, and reliability.

MK-3MiniHT Stack Specifications
Nominal Flow	1.14 m3/h (5.0 gpm)
Flow Rate Range	0.5–1.6 m3/h (2.2–7.0 gpm)
Shipping Weight	57 kg (126 lbs)
Dimensions (width x height x depth)	30 cm x 61 cm x 29 cm 12’’ x 24” x 12”

Product Water Quality Note 1
Guarantees Available
Resistivity	≥ 10 (Pharmaceutical) or ≥ 16 MOhm-cm (Industrial)
Sodium	≤ 3 ppb (industrial)
Silica (SiO2)	As low as 5 ppb (industrial)
Typical Removal Efficiencies
Sodium	≥ 99.9% removal
Silica (SiO2)	Up to 99% removal

Operating Parameters
Recovery	Up to 93%
Voltage	0–150 VDC
Amperage	0–5.2 ADC
Inlet Pressure Note 2	≤ 6.9 bar (100 psi)
Pressure Drop Note 3	1.4–2.8 bar (20–40 psi)
Hot Water Sanitization Cycles	160
Maximum Sanitization Temperature	85ºC (185ºF)
Maximum Sanitization Inlet Pressure	2.1 bar (30 psi)

Feed Water Specifications Note 4
Total Exchangeable Anions (TEA as CaCO3) Note 5	≤ 68.2 ppm
Conductivity Equivalent	≤ 117 μS/cm
Temperature	4.4–40˚C (40–104˚F)
Total Hardness (as CaCO3) Note 6	≤ 1.0 ppm
Silica (SiO2) Note 7	≤ 1.0 ppm
Total Organic Carbon (TOC as C)	≤ 0.5 ppm
Total Chlorine	≤ 0.05 ppm
Fe, Mn, H2S	≤ 0.01 ppm
Boron Note 8	≤ 1.0 ppm
pH	4 to 11
Oil & Grease	None detectable
Particulate Note 9	RO permeate
Oxidizing Agents	None detectable
Color Note 10	≤ 5 APHA

^{For more models, please click: https://www.fgwater.com/Veolia-Electrodeionization-EDI-Stack-Module/389.html}

^{E-Cell EDI Technology Performance Examples}

^{E-Cell EDI technology has been successfully applied in various industries such as power, petroleum, chemical, steel, pharmaceutical, and electronics.}

^{For application cases, please click:https://www.fgwater.com/Industries/}

^{About Us}

^{FG Water Technologies (www.fgwater.com) is now an organic part of Wuxi Fenigal Science and Technology Co. Ltd., which is a high-tech entity integrating water treatment quipment design, manufacturing, trading and shipment served for main industrial sectors.}

^{HAFE-FG Water Technologies has focused on the research of water treatment technology, equipment development and manufacturing, testing and international shipment etc. We work with many leading large-scale or small-medium original equipment manufacturers in China High-tech Development Zones, and engaged ourselves in R&D, manufacturing, and quality testing.}

^{Our main products include a variety of water purification and different treatment equipment, such as seawater reverse osmosis (SWRO) system, brackish water rever osmosis (BWRO), ultrafiltration (UF)system, Electrodeionization/EDI equipment, media pressure filters and ion exchanger softeners. So far, our company has become a major water treatment equipment supplier for food and beverage industry, pharmaceutical industry, chemical industry, electric power industry, urban water supply industry, municipal and industrial wastewater treatment and more industries, as well as being an exporter to more than 20 countries and regions in Asia, Europe, the Americas, Africa, etc.}

^{OUR CLIENTS}

^{PRODUCTION SYSTEM}

^{Our production system consist of a list of industry-specialized partnership factories accross China. Some of them singularly cover an area of over 10,000 square meters, including 5,000 square meters of workshop and warehouse and 1,500 square meters of office buildings. All of our technical staff has more than 10 years of experience in the design of water treatment systems, so we are able to provide the perfect solution for all kinds of water purification and sewage treatment applications.}

^{Since the establishment, the Company has always regarded quality as the life of our business. We choose the best components only for the production of various water treatment systems. Our systems are easy to use and maintain, and they stays highly reliable even under toughest conditions.}

Wuxi Fenigal Science & Technology Co., Ltd.