Precision Custom Stamping for Non-Standard Hardware | Iron &
Stainless Steel Parts for Durable, High-Load Applications
Stamping Capability
We specialize in high-precision metal stamping with
industry-leading equipment and expert process control. Our key
stamping capabilities include:
A. Minimum Pitch
0.5 mm – Enables high-density, micro-spacing stamping, ideal for fine
electronic components.
B. Maximum Stamping Speed
Up to 600 SPM (Strokes Per Minute) or more – Ensures high efficiency for mass production needs.
C. Precision Tolerance
±0.003 mm – Achieves ultra-precise dimensions suitable for high-end
applications like automotive terminals, connectors, and micro
components.
D. Hole Diameter to Material Thickness Ratio
0.85:1 – Supports stable and consistent punching of small holes in thin
materials.
E. Applicable Material Thickness
0.05 mm – 2.0 mm – Compatible with ultra-thin foils to thicker structural sheets,
including stainless steel, copper, aluminum, etc.
F. Material Utilization Efficiency
Zero or Near-Zero Material Waste – Optimized tooling design ensures maximum use of raw materials,
reducing cost and environmental impact.
Progressive drawing die As a die forms a shape from a flat sheet of metal, there is a need
for the material to move into the shape of the die. The flow of
material is controlled through pressure
applied to the blank and lubrication applied to the die or the
blank. If the form moves too easily, wrinkles will occur in the
part. To correct this, more pressure or less lubrication is applied
to the blank to limit the flow of material and cause the material
to stretch or thin. If too much pressure is applied, the part will
become too thin and break.
Drawing metal is the science of finding the correct balance between
wrinkles and breaking to achieve a successful part.
As a general rule, 3 times of metal thickness can be used for a
start point. If the part shows evidence of cracked, the tool has
been machined metal safe, thus allowing for additional radius. The
part specification may require a small radius under the flange that
may be achieved with one draw, as opposed to several draws to size
the radius.
Tool&Die Profile
| Part thickness | 0.5-2mm |
| Spare parts for Dies and insets | Accept JIS, AISI, DIN standard. From MISUMI, PUNCH, Mold Master,
LKM to DANLY, FIBRO, Dyton press and so on |
| Die type | Progressive deep drawing die ,progressive tool, stamping forming
die,compound die, ect. |
| Die material | YG15,YG20,DC53, SKH-9, SKH51, SKD11,D2, |
| Die use | Home appliance (automotive parts, household metal parts,electric
metal parts,terminal block parts) |
| Part material | Cold rolled steel,stainless steel,copper,aluminum |
| Machinery Equipment | Milling, Grinding, CNC, EDM, WEDM, Forming Machine, Precision flat
milling,Punching machine, |
| Die precision | High precision machining, minimum 0.003mm |
| Trial out press | 25~180T |
| First trial sample | 10 sets free
|
Packing:
First Step Wrapping by PE film to anti-rust.
Second wooden case without need of fumigation.Or as your required.
FAQ
Q: What’s your manufacture capability?
---- We use Sodick/Charmilles to frabricate die inserts,dimension
we can do is +/-0.002mm.
Q: Can you make all the dimensions are according to our
design/samples?
---- We can guarantee that all the dimensions are made according to
your drawing/sample.Please notice that dimension tolerence we can
do is +/-0.003mm.
Q: Did the stamping die suit for my press machine?
--- The stamping die is made according to your press machine’s
specification.Before start making die parts,we will send the design
for your approval.
Q: What’s your advantage compare with other supplier’s on the
market?
---- We are stamping factory,have a team contains die
design,making,maintance and stamping production.We know how
important the good mold for stamping production.
---- All our engineers are with more than 10 years working
experience.They are more professional on precision stamping field.
---- All the die parts we made are by Slow-speed wire EDM,can
gurantee the dimension.Many of them make it by middle-speed wire
EDM/fast-speed wire EDM
Stamping die details:
