Vacuum Conveyor
Product description
The intermittent vacuum feeder is an efficient and practical
automated material conveying equipment. It uses a vacuum pump to
generate vacuum suction force, quickly drawing powdery and granular
materials into the storage bin in a fully enclosed manner. Once the
set quantity is reached, it automatically stops and discharges,
completing one conveying cycle. This equipment has the advantages
of being clean and environmentally friendly. It can prevent dust
from spilling out and meet the hygiene requirements of the food,
pharmaceutical and other industries. The operation is simple and
convenient, reducing the labor intensity of workers. It can also
flexibly adapt to the conveying requirements of different heights
and distances, and has strong material applicability. It is widely
used in multiple fields such as chemical engineering and food, with
low maintenance costs and effective improvement of production
efficiency.
Working principle
After the equipment is started, the vacuum pump begins to work,
rapidly extracting air from closed Spaces such as the feeding
pipeline and storage bin, creating a vacuum environment in these
areas. At this point, the material outside the feeding port is
pushed into the feeding pipe under the action of atmospheric
pressure. As the pipeline is in a vacuum state, the materials are
sucked into the storage bin along the pipeline. When the material
in the storage bin reaches the pre-set feeding amount, a signal is
sent through devices such as the material level sensor. After
receiving the signal, the control system will stop the operation of
the vacuum pump and the vacuum suction force will disappear.
Subsequently, under the effect of gravity, the materials are
discharged from the discharge port of the storage bin and enter the
next production stage, thus completing one material conveying
cycle. Afterwards, the equipment can start the vacuum pump again
according to production needs to begin the next feeding process.
This intermittent cycle work continuously to achieve quantitative
and efficient material transportation.
Product features
1. High material conveying accuracy: The intermittent vacuum feeder
can precisely control the amount of material conveyed each time
through setting, which can accurately meet the precise material
quantity requirements in the production process. It is particularly
suitable for production processes with high requirements for
batching accuracy, such as the pharmaceutical and fine chemical
industries.
2. Convenient for cleaning and maintenance: The intermittent
working mode enables the equipment to have more time for cleaning
and maintenance during each feeding interval. It is convenient to
disassemble and clean components such as storage bins and
pipelines, effectively avoiding material residue and
cross-contamination. This is crucial for industries with strict
hygiene requirements such as food and medicine.
3. Strong flexibility: The intermittent vacuum feeder can flexibly
adjust the frequency of feeding and the amount of feeding each time
according to production needs, which can better adapt to changes in
different production batches and product specifications.
4. Low equipment cost: The structure of the intermittent vacuum
feeder is relatively simple, so the manufacturing cost and
procurement cost of the equipment are relatively low.
Product parameter
| Model | Hopper Capacity(L) | Working pressure | Conveying Capacity(kg/h) | Compressed air consumption |
| QVC-1 | 1.1 | 0.4-0.6Mpa | 50-300 | 180NL/min |
| QVC-2 | 6 | 0.4-0.6Mpa | 100-700 | 360NL/min |
| QVC-3 | 12 | 0.4-0.6Mpa | 300-1500 | 720NL/min |
| QVC-4 | 42 | 0.4-0.6Mpa | 600-3000 | 1440NL/min |
| QVC-5 | 60 | 0.4-0.6Mpa | 900-6000 | 2880NL/min |
Product details
Product shows
Application
Wide range of applications: The vacuum loader is mainly used for
conveying powdery and granular materials, such as raw
pharmaceutical powders,
chemicalders, metal oxide powders, etc.; however, it is not
suitable for conveying overly moist, sticky, or heavy materials.
Packaging & Shipping
Why Choose us
About us
Company Profile
We have been specializing in the production of Screening and
conveying equipment for 13 years. China's vibrating screen industry
top three. And we have done matching and OEM for many large
companies. Including the world's top vibrating screen manufacturer,
Sweco, USA, we have OEM for his China region. And our products are
often exported to Australia, Thailand, Indonesia, New Zealand and
other countries.
We welcome customers or dealers to visit our factory and will
arrange everything for you. Our factory address: West of the
industrial and commercial office of Da Zhaoying Town, Xinxiang
City, Henan Province.
