Introduction
The core helium test equipment is a highly efficient and reliable
machine designed for core hot pressing and high potential test. It
has advanced technology and accurate control to ensure the
integrity and safety of the cell. The device has compact design,
friendly interface, high productivity, high yield and low failure
rate. It has a wide working temperature range and provides a stable
and safe testing environment. The device meets industry standards
and is suitable for a variety of battery manufacturing
applications.
Technological Highlights
High Efficiency: the equipment achieves high productivity of ≥4 ppm, which ensures
fast and efficient hot pressing and high potential testing of the
cell.
Excellent product yield: equipment yield ≥99.5% , to ensure that the production of defects
or fault rarely high-quality cells.
Reliable performance: equipment failure rate as low as ≤2.0% , stable and consistent
operation, improve production efficiency, reduce downtime. Accurate control: use Compressed air, pressure 0.5-0.8 mpa, consumption 100lmin,
ensure the precision control of hot pressing and high potential
test process.
Humanized design: the equipment uses 380V ± 10% , three-phase 5-wire power supply. It
has an intuitive interface, easy to operate and maintain. Environmental Adaptability: the working temperature of the equipment is 25 ± 10 ° C and the
relative humidity (RH) is ≤45% . The storage temperature ranges
from -10 ° C to 45 ° C, the relative humidity ≤75% , and no
condensation.
Compact and portable: total weight ≤3.0 t, compact design, space saving, easy to install
and integrated into the existing production line.
Technical Parameters
Capacity: ≥4 ppm
Equipment failure rate: ≤2.0%
Product excellence rate: ≥99.5%
Compressed air: 0.5-0.8 mpa, dosage: 100 LPM
Power supply: 380 V ± 10% , 3-phase 5-wire system
Energy consumption: ≤8KW
Equipment appearance color: based on the actual color plate provided
by the buyer as
Quasi-noise: ≤75dB (measured at 500mm from the outer wall of the
equipment)
Load-bearing ratio: ≤500Kg/m ~ 2(when the equipment is full of jigs
and cells)
