ASME SA210 GR A1 Carbon Steel Seamless Tube For Boilers Application

ASME SA210 GR.A1 Carbon Steel Seamless Tube For Boilers Application

ASME SA210 GR.A1: This refers to a specific grade of carbon steel that meets the requirements of the American Society of Mechanical Engineers (ASME) for pressure vessel and boiler tubing. This alloy primarily consists of iron and carbon, with small amounts of other elements like manganese and silicon. For GR.A1, carbon content is generally around 0.25–0.35% with specific allowances for manganese, phosphorus, sulfur, and silicon.

It conforms to ASME SA210, which is designed for use in the production of carbon steel tubes for boilers and other high-temperature services.

The material is also subject to certain mechanical testing, including tensile, hardness, and impact tests, to ensure reliability under operational conditions.

Chemical Composition:

• Carbon (C): 0.25% to 0.35%
• Manganese (Mn): 0.30% to 0.60%
• Silicon (Si): 0.10% to 0.35%
• Phosphorus (P): ≤ 0.035%
• Sulfur (S): ≤ 0.035%

Mechanical Properties:

• Tensile Strength:Range: 415 - 550 MPa (60 - 80 ksi)
• Yield Strength (or Yield Point): Minimum: 240 MPa (35 ksi)
• Elongation:Minimum: 35% in 8 inches (200 mm) or 40% in 200 mm
• Hardness:Brinell Hardness: Maximum value of 160 HB
• Modulus of Elasticity:Range: Typically 200 GPa (29 × 10⁶ psi)

Applications:

Boilers: The tubes are widely used in the construction of heat exchangers and boilers for generating steam in power plants.

Pressure Vessels: Often found in pressure vessels where high-temperature resistance and strength are critical.

Heat Exchangers: These tubes are also used in the construction of heat exchangers for fluid heating or cooling.

Yuhong Holding Group has more than 35 years experience for pipeline products, till now we have 3 big joint venture factories, the total production area more than 130000 square meters, and more than 600 workers with 106 production lines give our clients excellent supporting always. The factories already got certificates like : ABS, LR, DNV-GL, BV, KR, CCS, ASME, ISO 9001, ISO14001, ISO18001, ect.

Our factories main products as below :
Factory 1th: Stainless steel seamless tube, Duplex steel seamless tube, Super duplex steel seamless tube, Nickel alloy steel seamless tube;

Factory 2th: Carbon steel seamless tube, Alloy steel seamless tube; Enhanced Heat Tranfer Tube, low fin tube ,U bending workshop;
Factory 3th: High frequency welding fin tube(HFW fin tube, Solid Fin tube, Studded Tube, Serrated Fin tube, Longitudinal welding fin tube), Wound fin tube(L type fin tube, LL type fin tube, KL type fin tube), Embedded G type fin tube , Extruded fin tube, low fin tube, U bend & 180deg. Return;

Yuhong Holding Group also has gained rich experience for project package( products contain:Pipes, Fittings, Flanges, heat exchanger, furnace, fired heater, air cooler, boiler) , YUHONG brand has marked its global presence in more than 85 countries, like, Korea, USA, Canada, Mexico, Colombia, Bolivia, Chile, Argentina, Brazil, Ecuador, Austria, New Zealand, Singapore, Malasyia, Indonesia, Thailand, Vietnam, Ukraine, Turkey,Sauid Arabia, Qatar, U.A.E,Israel,India, UK, France, Italy, Gernmany, Poland, Spain,... We have successfully implemented the orders of Cross Country Pipelines for our valuable customers. In addition, we have also developed a huge network of contacts and strategic alliances with most important manufacturers as stockists around the world.