BH100 Stainless Steel Plate and Frame Liquid Cooling Heat Exchanger
Gasket Plate Heat Exchanger With High Standard
Gasket plate heat exchanger is a type of heat exchanger. It is
characterized by high heat transfer coefficient; Easy to repair and
clean; Low fouling coefficient; Compact structure, small footprint,
light weight; Easy to change the heat transfer area or process
combination; The end temperature difference is small.
Introduction
It is made of a lot of stamped corrugated sheet at a certain
interval, sealed by gaskets around, and superimposed by the frame
and compression spiral, the four corner holes of the plate and
gasket formed a fluid distribution tube and a collection tube,
while reasonably separating the hot and cold fluid, so that it
flows in the flow channel on both sides of each plate, through the
plate for heat exchange.
Working principle
The gasket plate heat exchanger consists of a set of metal plates
with four corner holes on the plate for both hot and cold media to
pass through. When assembled, A plate and B plate are alternately
arranged, a network channel is formed between the plates, and the
sealing pad seals the hot and cold media in the heat exchanger,
while reasonably separating the hot and cold media without mixing.
In the channel, the cold and hot fluid flow at intervals, can be
countercurrent or along the flow according to the need, in the flow
process of the cold and hot fluid through the wall heat exchange,
so as to achieve the desired effect.
| Model | BH100B / BH100H |
| Cross Reference | M10M, M10B |
| Height, H [mm] | 1084 | 1084 |
| Width, W [mm] | 470 | 470 |
| Min standard length, L [mm] | 700 | 700 |
| Max standard length, L [mm] | 2300 | 2300 |
| Vertical port distance, VC [mm] | 719 | 719 |
| Horizontal port distance, HC [mm] | 225 | 225 |
| Max temperature [°C] | 180 | 180 |
| Max pressure [barg] | 10 | 16 |
| Flange size | DN100/4'' | DN0100/4'' |
| Max. flow rate [kg/s] | 50 |
(Measurment in mm, N means the number of the plates)
| Material of Plate | Suited Liquid Kinds |
| Stainless Steel (AISI304.316 Etc) | Pure Water, Normal Water, Oil for eating, Mineral Oil |
| Ti, Ti-pd | Sea Water, Saline Water, Mineral Water |
| 20Cr, 18Ni, 6Mo (254SMO) | Dilute Sulphuric Acid, Organic Water Solution |
| Ni | High-temp and concentration caustic soda |
| Hastelloy (C276, D205, B2G) | Concentration Sulphuric Acid, Hydrochloric acid, Phosphoric acid |
| Material of Gasket | Operating Temperature ° C | Suited Liquid Kinds |
| NBR | -15~+135° C | Water, Sea Water, Mineral Oil, Salinous Water |
| EPDM | -25~+180° C | Hot Water, Steam, Acid, Alkali |
| F26 | -55~+230° C | Acid, Alkali |
| TPF | -0~+160° C | High Concentrated Acid, Alkali, High temperature Oil, Steam |
The gasket plate heat exchanger, with its unique design and
efficient performance, has been widely used in various industrial
and civil fields. It is highly efficient, compact, lightweight and
easy to maintain, making it a leader in modern heat transfer
technology.
The biggest feature of the gasket plate heat exchanger is its high
efficiency. Due to its unique plate design, the hot and cold fluids
flow in a very small flow channel, which greatly improves the heat
transfer efficiency. At the same time, due to the turbulent state
of the fluid, the heat transfer process is more efficient.
