TPE Automotive Pedals Thermoplastic Elastomer With Excellent Compression Set Resistance Raw Material TPE Granules

TPE vs. TPU for Automotive Pedals: Which Polymer Accelerates Your Design?

As automotive engineers and designers push boundaries in vehicle performance and sustainability, material selection for components like pedals has become a critical engineering decision. Two advanced polymers lead the race: Thermoplastic Elastomers (TPE) and Thermoplastic Polyurethane (TPU). Let's explore their unique advantages for pedal applications.

1. Material Showdown:
TPE (Thermoplastic Elastomer)
- Superior vibration damping (20-40% better than rubber)
- Excellent compression set resistance
- Lightweight (1.0-1.2 g/cm³ density)
- Broad temperature range (-40°C to 130°C)
- Recyclable for sustainable manufacturing

TPU (Thermoplastic Polyurethane)
- Exceptional abrasion resistance (3x better than TPE)
- High tensile strength (up to 50 MPa)
- Superior oil/fuel resistance (critical for pedal housings)
- Enhanced dimensional stability
- UL94 V-0 flame retardant options

2. Why Automotive OEMs Choose These Polymers
- Ergonomic Optimization: TPE's soft-touch surface (Shore A 50-90) enhances driver comfort during prolonged use
- Safety Compliance: TPU meets FMVSS 124 pedal return requirements
- Weight Reduction: 30-50% lighter vs. metal components
- Corrosion Resistance: Eliminates rust issues in electric vehicles
- Design Freedom: Both materials enable complex geometries for pedal assemblies

3. Application Spotlight
- TPE Dominates: Brake pedal pads, clutch pedal covers
- TPU Excels: Accelerator pedal mechanisms, pedal bracket components
- Hybrid Solutions: Multi-material molding combines TPE grip with TPU structural elements

4. Sustainability Drive
Both materials support circular economy goals:
- 100% recyclable in closed-loop systems
- Reduce assembly steps (vs. multi-part metal/rubber designs)
- Enable lightweighting for improved fuel efficiency

5. The Road Ahead
Emerging innovations:
- Conductive TPE variants for pedal position sensors
- Self-healing TPU formulations
- Bio-based grades with 40% renewable content

Why This Matters for Your Next Project
Choosing between TPE and TPU isn't about finding a "better" material – it's about matching polymer properties to functional requirements. While TPU offers mechanical robustness for structural elements, TPE delivers unparalleled comfort for driver interfaces.

Let's Discuss:
- Have you implemented TPE/TPU in pedal designs?
- What performance factors weigh most heavily in your material selection?
- Interested in comparative cost-benefit analysis for specific applications?

Drop your insights below or DM me to explore how advanced polymers can optimize your next automotive design.

Quick detail:

Kunshan Kesun founded in 2003 is a professional manufacturer of TPEs(TPE/TPR/TPU/TPV/TPEE/TPO). At present, it has three factories in China with an annual capacity of 100000 tons, and has a leading research and development center in China, which can provide customers with customized products according to their need. Kesun has more than 48 production lines.

Product description:

Thermoplastic Elastomer TPE Main raw materials:

• Thermoplastic styrene butadiene rubber SBC (SEBS/SBS/SIS)
• Hard plastic PP, PS, PE etc

Thermoplastic Elastomer TPE Forming way:

• physical blending

Thermoplastic Elastomer TPE Main features:

• Excellent temperature and weather resistance
• Good slasticity and easy coloring
• Recyclable
• Wide range of hardness (0-98A)
• Various processing methods (Injection molding, extrusion, lamination, blow molding, etc)

Thermoplastic Elastomer TPE main physical properties for reference:

Materials can be developed and produced according to your request!

Factories And Warehouses

Since the establishment in 2003, Kunshan Kesun Polymer Co., Ltd has been dedicated to the environmental protection cause with philosophy of "guided by technology, based on credibility and integrity".

• 48 production lines with capacity over 100000 tons
• High automation and high standard workshop

R&D department

• Kesun is a professional manufacturer that integrates R&D, production and sales of thermoplastic elastomer.
• Kesun strives to build itself to be a comprehensive thermoplastic elastomer supplier to provide the best solutions for different enterprises.

• Application in consumers goods:Folding basin, massager, funnel, water coaster, toothbrush, fake fishing lure, sealing strip, lunch box, door stop, labels at the bottom of cup, etc.
• Application in automotive: Light seal, trunk switch, window seal, pedal, air duct, wiper, car spoiler, shock absorbing gaskets, cup holder roller cover
• Application in food contact products: Cutting borad, knives, stoppers, bottle liners, fruit baskets, ice trays, funnels, toothbrushes, etc.
• Application in floor covering: Household carpet, suspended floor, plastic track, resilient floor, etc.
• Application in 3C products ( Information Appliance): display frame, foot pad, mouse wheel, mouse over-mold, damping bolt, IC plug, electric toothbrush, washing machine, etc.
• Application in plastic overmold: electrical tool, screwdriver, car armrest, blood measuring instrument, ammeter, razor, car door handle, etc.
• Application in flame retardant: Fiber tail sleeve, wire and cable, firefighting accessories, dust cover, auto parts, electrical accessories, etc.
• Application in toys: pet bone, pet barbed ball, pet foaming bone, dog biting stick, pet glowing ball, pet flying disc, pull ring, olive tree, toy car tire, etc.
• Application in culture and sports products: pen hand grip, binding machine, pencil sharpener, art knife, skipping rope, belly execise wheel, yoga mat, yoga belt, trekking pole, puller, dumbbell piece, knee pad, squeeze ball, etc.
• Application in luggage accessories: luggage caster, luaages strip, luggage handles(over-molding PP, ABS, PA), earthworm shape strip, zipper head, label, etc.

Exhibitions

• 2023.11.22-2023.11.25 Plast Eurasia Istanbul
• 2024.01.21-2024.01.24 Russia International Plastics Exhibition
• 2024.06.26-2024.06.28 Central Asia Plast World
• 2024.07.11-2024.07.13 My-Plas(MALAYSIA PLASTIC,MOULD&TOOLS)
• 2024.09.08-2024.09.11 Iran International Plastics & Rubber Exhibition
• 2024.12.04-2024.12.07 Plast Eurasia Istanbul
• 2025.02.12-2025.02.15 IPF BANGLADESH 2025‌

Q : Are you factory or trading company?

A : We are a professional TPE/TPR, TPV, modified TPU, modified TPEE manufacturer in Kunshan, Jiangsu, China.

Q : How many employees do you have in your factory?

A : 300+.

Q : What's your factory's production capacity?

A : We have three factories in China with an annual capacity of 100000 tons.

Q: Do you support OEM /ODM?

A: Yes, we can make products according to your request.

Q: Can I get a sample for trial?

A: Free sample will be sent to you for testing.

Q: How long is the delivery time?

A: Delivery time will be within 15 days.

Q: What certifications have your products passed?

A: CTI, PONY, RoHS, REACH, UL, LFGB, etc have been made for different series of materials. Feel free to contact us to get suitable material TDS, certifications and testing reports.