Industrial screening machine
Product description
The in-line screen is an efficient screening equipment, which
rotates the eccentric block on the shaft of the vibration motor,
converts the motor rotation into multi-directional force by
centrifugal force, and drives the screen body to make the material
move in an elliptical trajectory. It has a large processing
capacity and a large discharge port at the bottom to allow
materials to pass through the net quickly; Good applicability,
single and double motor, adjustable track, can be used single or
multi-layer; Energy saving and environmental protection, low energy
consumption and good sealing; Easy maintenance, compact structure,
external motor, easy to change the screen clean. Widely used in
food, chemical, pharmaceutical, mining, building materials and
other industries, screening all kinds of materials, improve product
quality and production efficiency.
Working principle
When the screen is working, the vibration motor starts to run as
the core power component. The eccentric block installed on the
shaft rotates at a high speed. Because the center of gravity of the
eccentric block deviates from the center of the rotating shaft,
centrifugal force will be generated during the rotation process.
This centrifugal force will break the balance of the motor, and
then drive the motor to vibrate. The motor is closely connected
with the screen body, and the vibration of the motor is transmitted
to the screen body, so that the screen body also begins to
high-frequency vibration. At this time, the material placed on the
screen surface, on the one hand by the sieve body vibration
generated by the exciting force, jumping forward on the screen
surface; On the other hand, the gravity of the material itself will
cause it to have a tendency to move down the screen surface. Under
the combined action of these two forces, the material smaller than
the size of the screen can pass through the screen and fall, while
the material larger than the size of the screen remains on the
screen surface and continues to move forward until it is discharged
from the discharge port, so as to achieve the screening of the
material.
Product Features
High screening efficiency: the unique vibration mode makes the
movement of the material on the screen surface reasonable, can be
quickly stratified and sifted through, the large discharge port
design also helps the material to be quickly discharged, greatly
improving the screening efficiency and large processing capacity.
High precision: By adjusting the parameters of the vibration motor,
such as the Angle and weight of the eccentric block, the motion
state of the material can be accurately controlled to meet the
screening requirements of different precision, and the accurate
classification of the material can be achieved.
Simple structure: mainly composed of screen frame, screen,
vibration motor and base and other basic components, the overall
structure is simple, there is no complex transmission device, easy
installation, operation and maintenance, equipment stability is
good, low failure rate.
Wide range of applications: whether it is fine powder materials, or
large particles of block materials, or different properties of
materials, such as dry, wet materials, etc., straight screen can be
effective screening, in food, chemical, pharmaceutical, mining,
building materials and other industries are widely used.
Environmental protection and energy saving: low energy consumption
in the operation process, and the use of sealed design, can
effectively prevent dust and material leakage, reduce environmental
pollution, in line with environmental requirements.
Easy to clean: the design of the screen body is easy to clean,
there is no dead Angle of material residue, and the screen
replacement is convenient, which can quickly complete the
disassembly and installation of the screen, reducing the
maintenance cost and downtime of the equipment.
Product parameter
| Model | Power(kw) | Sieving diameter(mm) | Dimension(mm) |
| BZP-600 | 0.12 | 520 | 740*600*560 |
| BZP-800 | 0.18 | 720 | 1010*800*600 |
| BZP-1000 | 0.18 | 890 | 1200*970*640 |
| BZP-1200 | 0.25 | 1090 | 1430*1700*700 |
| BZP-1500 | 0.25 | 1390 | 1780*1470*760 |
| Machine can be customized based on your need |
Schematic diagram
Detail display
Application
Packaging & Shipping
Why Choose us
About us
We have been specializing in the production of Screening and
conveying equipment for 13 years. China's vibrating screen industry top three. And we have done
matching and OEM for many large companies. Including the world's top vibrating screen manufacturer,
Sweco, USA, we have OEM
for his China region. And our products are often exported to
Australia, Thailand, Indonesia, New Zealand and other countries.
We welcome customers or dealers to visit our factory and will
arrange everything for you.Our factory address: West of the industrial and commercial office of Da
Zhaoying Town, Xinxiang City, Henan Province.
