Electric Melting Continuous Annealing Furnace Four Tube 1100C

Electric Melting Furnace Fuel Electric Htf4572-0611nh Four-Tube Annealing Furnace 14850*950*1460mm L*W*H 1100 ordm C

The HTF4572-0611NH type four-tube annealing furnace is a specialized sintering equipment for the heat treatment of metal wires. This equipment is designed and manufactured based on the advanced design concepts of international counterparts and the extensive experience of our company in kiln design and manufacturing. The product quality meets the level of international counterparts.

Equipment Model: HTF4572-0611NH type four-tube annealing furnace
Rated Temperature: 1100°C
Maximum Temperature: 1150°C
Furnace Tube Size: Φ150mm × 2500mm
Number of Temperature Zones: 6
Thermocouple Type: N-type
Temperature Control Accuracy: ±1°C
Temperature Control Method: Yamatake temperature controller from Japan, with adjustable heating rate
Heating Element: Silicon carbide rods
Furnace Atmosphere: Nitrogen or nitrogen-hydrogen mixed gas
Cooling Method: Water cooling
Empty Furnace Heating Time: ≥200 minutes (from room temperature to 1100°C)
Maximum Heating Power: 90kW
Empty Furnace Insulation Power: ≤45kW
Power Supply Requirements: 380V±10%, 50Hz, 3-phase 5-wire
Overall Dimensions: See layout diagram
Weight: Approximately 4500kg

Usage Conditions
1.The equipment must be installed indoors, with an ambient temperature range of -15°C to 45°C. The indoor environment must be free of flammable gases, corrosive gases, and steam.
2.The equipment requires a floor area of no less than 90 square meters, with a working space length of no less than 30 meters, a width of no less than 3 meters, and a height of no less than 3 meters. The foundation must be sturdy and level, and the total weight of the furnace is approximately 4500kg.
3.The power supply for this furnace must be a three-phase five-wire AC power line, 380±10%V, 50±2%Hz. This power line must be dedicated, and large power conversion equipment such as welding machines, electric furnaces, and metal cutting machines should not be connected to this distribution.
4.The equipment must be reliably grounded.