The design is different from traditional cement mills and mining
and metallurgical mills, and meets the requirements of German
superfine filler grade mineral processing.
Optimize the aspect ratio to prevent excessive grinding and achieve
optimum grinding results.
Optimize the opening ratio and opening design of the jaws, and
increase the grinding fineness with a smaller grinding media.
The slab-type grinding tail discharges, the discharging is smooth,
there is no grinding phenomenon, and the cylinder does not need to
be cooled.
Grinding media according to product requirements, reasonable ratio,
high filling rate, high efficiency.
Grinding aids when grinding ultrafine powders to improve grinding
efficiency.
Optimize the matching of drive and grinding energy to maximize
energy savings.
And the classifier forms a closed system, negative pressure
conveying, no dust.
Optimize the shape and material of the lining and grinding media,
according to German standards, reduce the damage rate and improve
the grinding efficiency.
Hard minerals can be designed with no iron pollution, and the
lining and grinding bodies are made of alumina ceramic, quartz,
SILEX or special materials.
| MODEL | 1530 | 1557 | 1850 | 1870 | 2250 | 2270 | 2450 | 2470 | 2660 | 2670 | 3070 | 3090 | 3280 | 3290 |
|---|
| Cylinder diameter (m) | 1.5 | 1.5 | 1.83 | 1.83 | 2.2 | 2.2 | 2.4 | 2.4 | 2.6 | 2.6 | 3 | 3 | 3.2 | 3.2 |
|---|
| Cylinder length (m) | 3 | 5.7 | 5 | 7 | 5 | 7 | 5 | 7 | 6 | 7 | 7 | 9 | 8 | 9 |
|---|
| Motor power (kw) | 75 | 132 | 160 | 250 | 250 | 380 | 320 | 475 | 500 | 630 | 800 | 1000 | 1250 | 1400 |
|---|
| Feeding size (mm) | 1 ~ 5 | 1 ~ 5 | 1 ~ 5 | 1 ~ 5 | 1 ~ 5 | 1 ~ 5 | 1 ~ 5 | 1 ~ 5 | 1 ~ 5 | 1 ~ 5 | 1 ~ 5 | 1 ~ 5 | 1 ~ 5 | 1 ~ 5 |
|---|
| Fineness (um) | 5 - 75 | 5 - 75 | 5 - 75 | 5 - 75 | 5 - 75 | 5 - 75 | 5 - 75 | 5 - 75 | 5 - 75 | 5 - 75 | 5 - 75 | 5 - 75 | 5 - 75 | 5 - 75 |
|---|
