Portable Flange Facers
Portable flange facers are mainly used as equipment for on-site
flange processing and repair. According to the mounting way, they
can be divided into two types: ID mount flange facers and OD mount
flange facers. They are mainly used for processing pipeline end
faces, pressure vessel connection flange faces, and various types
of Form of sealing groove, etc.
Main Features:
* The entire equipment components adopt modular design, which can
achieve fast loading and unloading on
site, greatly saving time.
* The installation methods of flange facers are: ID mount type and
OD mount type, with diverse installation
forms.
* It can be installed horizontally or vertically, with good
stability and adaptability to various complex working
conditions.
* Radial automatic feeding, with manual fine adjustment device
installed in the axial direction.
* Multi speed conversion to the most suitable feed speed for full
cutting output, ensuring the efficiency and
accuracy of rough and precision machining.
* It has a fast tool retraction function, which is convenient and
fast to operate.
* The power system can choose hydraulic system and servo motor as
power sources, with strong cutting power and high overall
stability.
* Equipped with remote circuit control system, it is easy to
operate and has high Factor of safety.
ID mount flange facers
We offer a wide variety of rugged and innovative portable flange
facers for 300 to 8000 mm diameters, for ID mounting. Several of
our machines can be configured for facing, milling or both, and
many of our models reface, mill, bevel, square, counterbore, or cut
end-prep configurations for welding. For easy setup, smaller units
use an integral mandrel to quickly lock into place, while the
larger units can be installed with a separate mount or chuck to
which the facer body is installed.
| Model | Spindle diameter | Facing diameter | Cutter Length | Vertical travel |
| LTCN1000 | Φ 150 mm | Φ300-Φ1000mm | 700 mm | 50 mm |
| LTCN1500 | Φ 180 mm | Φ600-Φ1500 mm | 950 mm | 60 mm |
| LTCN2000 | Φ 200 mm | Φ1000-Φ2000 mm | 1550 mm | 80 mm |
| LTCN3000 | Φ 240 mm | Φ1000-Φ3000 mm | 2000 mm | 100 mm |
| LTCN5000 | Φ 320 mm | Φ2000-Φ5000 mm | 3000 mm | 120 mm |
| LTCN8000 | Φ 450 mm | Φ4000-Φ8000 mm | 5500 mm | 200 mm |
OD mount flange facers
We offer a wide variety of rugged and innovative portable flange
facers, for 50 to 1800 mm diameters, for OD mounting, and several
of our machines can be configured for facing, milling, or both! For
easy setup, larger units can be installed with a separate mount or
chuck to which the facer body is installed.
| Model | OD mounting diameter | Facing diameter | Bolt Qty |
| LTCW300 | Φ60-Φ300 mm | Φ50-Φ300 mm | 4 |
| LTCW600 | Φ300-Φ600 mm | Φ150-Φ600 mm | 8 |
| LTCW1200 | Φ600-Φ1200 mm | Φ300-Φ1200 mm | 8 |
| LTCW1800 | Φ1200-Φ1800 mm | Φ1200-Φ1800 mm | 8 |
Note: The above are regular product specifications, special
specifications can be customized.
Application:
| ID mount flange facer installs expansion bolts tightly on the
cylindrical surface of the inner wall of the flange as support. It
is required to have a relatively regular cylindrical surface, which
saves space. ID mount flange facers are preferred when applicable. | OD mount flange facer can be used to process the flanges with
uneven surfacing faces or without mounting space. It is a new type
of flange processing equipment independently developed by our
company, with superior performance. It is widely used for
processing and repairing flange surfaces and sealing grooves of
pressure vessels such as hydrogenation reactors. |
LCTN1000 LCTW300
