Self-adhesive PE Waterproof Sheet Membrane Production Line With Single-screw Design

Product descriptions from the supplier

Machine Consists and main technical data

Main Data:

* Double-layer sheet thickness: 0.5-1.5mm adjustable
* Double layer ratio A/B, 50%-70% adjustable
* Flatness: less than 5%
* Output: Standard type: Rated output 700kg/h, actual production output 600kg/h
* Sheet width: 2200 mm
* Roller diameter X length: 500x2500
* T mold: 2300mm
* Production machine speed 12m/min
* Actual production of standard equipment: 3-5m/min
* Actual production of high-yield equipment: 8-10m/min
* Production control mode: from feeding to winding, fully automatic control, joint adjustment and fine adjustment are possible.
* Installed power: Standard type: about 250kw High-yield type: 400kw
* Power source: ~380V±15% 50Hz
* Air source: 0.6～8Mpa
* Water source: 0.15～4MPa circulating cooling water

Consists:

* 2 tons of mixed + dry silo: 1 set
* Single screw extruder: 2 sets
* Standard type: Specification: 100/33 (120/33 for high-efficiency type)
* Single-plate double-station filter: 2 sets
* T-die sheet extrusion head: 2 sets
* Horizontal three-roll forming unit: including 1 mold temperature controller
* Horizontal double-roller cooling setting (high-efficiency unit): 1 set, optional
* Laminated base material anti-roll device: 1 set
* Adjustable cooling roller device: 1 set
* Storage device: 1 set of pneumatic control principle
* Double roller traction device: 1 set
* Horizontal cutting device: 1 set
* Standard type of winding device: 1 unit (2 units are required for high-efficiency type)
* Small crane transfer products: 1 unit

       Located in Shenzhen City which is the most lively and youngest top city in China, it's next to HongKong and Guangzhou City. 

       Shenzhen HYPET founded in 2002, and it inherits from China national extrusion machinery entrerprise. Base on Germany and Italian technology, HYPET invented and manufacture unique gear box with own patent. For these reason to keep HYPET tech and machine quality priority in extrusion machine field. 

      The first block type DIY plastic extruder solves the machine agents' many problem. They can easily get extruder parts from HYPET factory then assembles them in their own workshop via the installation video. 

      The plastic extrusion line core part is the extruder. If the extruder is good, then the line 70% is good. So HYPET offer the service to match local downstream or old downstream service.

       Shenzhen HYPET machine is focus on top quality but best enconomic price. Our main plastic extrusion machine includes but not limited PVC / HDPE / PPR pipes extrusion production line, PVC and WPC all type of profiles (PVC window, ceiling, wallpanel, decking, gutter, duct...) production line, PVC plastic marble sheet line, SPC floor production line, WPC door plant, PVC foam board line, Nonweave melt blown fabric line.....

       HYPET also offer the special PVC processing aid to decrease your final product cost and increase the product quaity & better shining surface.

      We have a full technical team can help you design, manufacture, assemble, inspect and test the plastic machine meet your request.