CA200 Intelligent Fire Alarm Control Panel For Building Fire Safety
System
Introduction
CA200 fire alarm controller and fire detectors and modules
constitute an automatic monitoring and control system to monitor
the fire smoke situation on the site, it uses intelligent
algorithms to judge its status (fire alarm or fault or feedback)
and accomplish automatic fire alarm and linkage function. The
controller uses bus communication to set alarm, monitor and control
on the same loop bus. The hardware circuit is controlled by a
single chip microcomputer. The layout is simple and compact, and it
is easy to install and expand. The controller is wall-mounted,
touch panel display with beautiful appearance, it is a
high-performance, high-reliability and intelligent fire alarm
controller.
Parameters| Product Name | Addressable Fire Alarm Control Panel | Capacity | 1-1524control points, maximum 6 loops |
| Capacity | Maximum 6 loops | Main power supply | AC220V± 15%, 2.5A, 50HZ. |
| Battery power supply | DC 24V (2 sealed batteries: 2*12V*7Ah) | Loop Bus wired | Non-polarity 2 wired. |
| LCD | Touch panel, Networkable, Colored LCD
| Operating Environment | Temperature -10°C~+50°C
Humidity ≤95%. |
| Dimentions | 400mm×500mm×125mm. | Certification | CE |
Main Functions
1. System self-test function. The system will test indicator light,
LCD screen, sounder etc.
2. Inquiry function. Check model type zone number, device
definition etc.
3. Event record. Record the fire alarm information and other
operation record.
4. Data sampling. Data analysis.
5. Setting function. Set the password, time, printer information.
6. Install and programming. Address coding, Login, Logical
programming
7. Feedback function. Give real-time feedback information after
starting the equipment.
8. Faulty alarm function. Automatically check the working status of
main power supply, battery power supply, detectors , modules and
report the detail fault information.
Connection Diagram
Product Range
Conventional Fire Alarm System
Addressable fire alarm system
Gas Extinguishing control system
Beam Detector
4 wire smoke detectors with relay output.
2 wire Conventional smoke and heat detectors
Explosion-proof flame detector for fire alarm system
Standalone smoke detectors and combustable gas detector
Service
1. OEM &ODM service.
2. Provide special technical support and after-sale service.
3. 1 year warranty.
4. Normally 15 working days lead time.
5. Welcome sample order.
