Brief Introduction of Vertical Laboratory Planetary Ball Mill
Planetary ball mill is a device for mixing, fine grinding, small
sample preparation, new product development and small batch
production of high-tech materials. The planetary ball mill of our
company is small in size, full in function, high in efficiency and
low in noise. It is a powder equipment for scientific research
institutions, universities and enterprise laboratories to obtain
research samples (four samples can be obtained at the same time for
each experiment). With a vacuum ball mill tank, the test samples
can be ground under vacuum.
Laboratory Planetary Ball Mill Applications
Planetary ball mill is widely used in geology, mineral industry,
metallurgy, electronics, building materials, ceramics, chemical
industry, light industry, medicine, environmental protection and
other departments, and is applicable to electronic ceramics,
structural ceramics, magnetic materials, lithium cobalt oxide,
lithium manganese oxide, catalyst, fluorescent powder, long
persistence luminous powder, dilute earth polishing powder,
electronic glass powder, fuel cell, zinc oxide varistor,
piezoelectric ceramic, nano material, wafer ceramic capacitor,
MLCC, thermistor (PTC, NTC), ZnO varistor, dielectric ceramic,
alumina ceramic, zirconia ceramic, fluorescent powder, zinc oxide
powder, cobalt oxide powder, Ni-Zn ferrite, Mn-Zn ferrite, etc.
Production field of products.
Powder Laboratory Planetary Ball Mill Features
Square design elements are adopted for the equipment shell.
High-precision die stamping forming is generous and exquisite,
high-end and stable; Machining parts adopt numerical control
processing technology, the planetary disc is integrally cast and
formed, and the transmission gear adopts special material precision
gear to ensure stable and quiet operation of the equipment at high
speed; The pressing device of grinding tank is easy to operate,
safe and reliable.
Laboratory Planetary Ball Mill Details
Technical Parameters of Tencan Vertical Planetary Ball Mill
| Drive Mode | Gear drive |
| Operation Mode | Two or four grinding tanks can be used for grinding for each batch |
| Max Capacity for Materials | Less than 1/3 of each jar volume
Total max capacity: less than 1/3 of total jars volume |
| Feed Size of Materials | Soft and crispy materials ≤ 10mm
Other hard materials ≤ 3mm |
| Output Granule | Smallest granularity can be achieved to 0.1μm |
| Rotational Speed Ratio | 1/2 |
| Max.Continuous Operating Time | 72 Hours |
| Materials of Available Mill Jars | 304 or 316l stainless steel, Zirconia, Nylon, Polyurethane,
Alumina ceramic (corundum), PTFE, Agate, Tungsten carbide |
Laboratory Planetary Ball Mill Parameters
Table 1: Reference of Planetary Ball Mill with Tank
| Technical Parameter Table(I) of Vertical Planetary Ball Mill |
| Type No. | Specification | Volume of Each Matched Pot | Quantity | Remarks |
| XQM-1 | 1L | 50-250ml | 4pcs | Matched with vacuum mill pots from 50ml to 250ml |
| XQM-2 | 2L | 50-500ml | 4pcs | Matched with vacuum mill pots from 50ml to 250ml |
| XQM-4 | 4L | 250-1000ml | 4pcs | Matched with vacuum mill pots from 50ml to 1000ml |
| XQM-6 | 6L | 1-1.5L | 4pcs | Matched with vacuum mill pots from 50ml to 1000ml |
| XQM-8 | 8L | 1-2L | 4pcs | Matched with vacuum mill pots from 50ml to 1500ml |
| XQM-10 | 10L | 1-2.5L | 4pcs | Matched with vacuum mill pots from 1L to 2L |
| XQM-12 | 12L | 1-3L | 4pcs | Matched with vacuum mill pots from 1L to 2L |
Table 2: Main Parameters of Planetary Ball Mill
| Technical Parameter Table(II) of Vertical Planetary Ball Mill |
| Model | Power
(KW) | Voltage | Revolution
Speed
(rpm) | Rotation
Speed
(rpm) | Total
Timing
(min) | Alternating Run Time
of Forward
& Reversal Rotation
(min) | Noise≤db |
| XQM-1 | 0.75 | 220V-50Hz | 35-335 | 70-670 | 19999 | 1999 | 60db |
| XQM-2 | 0.75 | 220V-50Hz | 35-335 | 70-670 | 1-9999 | 1-999 | 60db |
| XQM-4 | 0.75 | 220V-50Hz | 35-335 | 70-670 | 1-9999 | 1-999 | 60db |
| XQM-6 | 0.75 | 220V-50Hz | 35-335 | 70-670 | 1-9999 | 1-999 | 60db |
| XQM-8 | 1.5 | 220V-50Hz | 35-290 | 70-580 | 1-9999 | 1-999 | 60db |
| XQM-10 | 1.5 | 220V-50Hz | 35-290 | 70-580 | 1-9999 | 1-999 | 60db |
| XQM-12 | 1.5 | 220V-50Hz | 35-290 | 70-580 | 1-9999 | 1-999 | 65db |
Table 3: Planetary Ball Mill Size Weight Reference
| Technical Parameter Table(III) of Vertical Planetary Ball Mill |
| Model | Power
(KW) | Speed Control Mode | Net Weight (kg) | Dimension (mm) |
| XQM-1 | 0.75 | Frequency Control | 93 | 750*470*564 |
| XQM-2 | 0.75 | Frequency Control | 93 | 750*470*564 |
| XQM-4 | 0.75 | Frequency Control | 93 | 750*470*564 |
| XQM-6 | 0.75 | Frequency Control | 93 | 750*470*564 |
| XQM-8 | 1.5 | Frequency Control | 150 | 900*600*640 |
| XQM-10 | 1.5 | Frequency Control | 150 | 900*600*640 |
| XQM-12 | 1.5 | Frequency Control | 150 | 900*600*640 |
