Radiation Detector Radiation Detector Electromagnetic Telepole
Radiation Detector
Description:
Our UV Aging Test Lamp is designed to conduct comprehensive aging
tests on non - metallic materials. It is perfect for materials used
in the furniture, sports equipment, and marine industries. The lamp
is made of corrosion - resistant materials and can generate UV
light to simulate real - world sunlight exposure. It can cause the
tested materials to show signs of degradation, including color
fading, cracking, and brittleness, allowing for a better
understanding of the material's performance under outdoor
conditions.
Design criteria:
(1) ASTM D4587: Standard Practice for Fluorescent UV-Condensation
Exposures of Paint and Related Coatings
(2) ASTM D4799: Standard Practice for Accelerated Weathering Test
Conditions and Procedures for Bituminous Materials (Fluorescent UV,
Water Spray, and Condensation Method)
(3) ISO 4892-1: Plastics - Methods of Exposure to Laboratory Light
Sources - Part 1: General guidance
(4) ISO 4892-3: Plastics - Methods of Exposure to Laboratory Light
Sources - Part 3: Fluorescent UV Lamps
(5) ASTM D4329: Standard Practice for Fluorescent UV Exposure of
Plastics
(6) AATCC TM186: Weather Resistance: UV Light and Moisture Exposure
Control System:
Employs a black - hued aluminum plate to connect with the
temperature sensor, and a black - board temperature gauge is used
for heating regulation, thus ensuring a more stable temperature
level.
The radiometer probe is firmly attached to avoid the repeated
process of installation and disassembly. A special UV irradiometer
with high - precision display and measurement features is used to
monitor the radiation quantity. The radiation intensity does not go
beyond 50W/m². The illumination and condensation functions can be
controlled separately or in an alternating, circular sequence.
Specifications:
| Standard specimen size | 75×290mm/24 pieces |
| Power | 1 phase, 220V/50Hz /±10% 5KW |
| blackboard temperature range | room temperature 30 ℃ ~ + 80 ℃ |
| Irradiation black panel temperature | 50℃~70℃ |
| Material: | Stainless Steel |
| Lifetime of lamp | 1600Hours |
| Lamp power & length | 40W/Piece, 1200mm/Piece |
FAQ
1. What types of industries benefit the most from using an
ultraviolet aging test chamber?*
Industries such as automotive, where exterior components are
constantly exposed to sunlight and weather, greatly benefit. The
electronics industry also uses it to test the durability of
components in outdoor - installed devices. Textile and footwear
industries can assess the colorfastness and material strength under
UV exposure. Moreover, the construction and packaging industries
rely on it to ensure the longevity of their products.
2. How does temperature impact the aging process in the ultraviolet
aging test chamber?*
Temperature can significantly influence the rate of aging. Higher
temperatures generally accelerate chemical reactions and physical
changes in materials when combined with UV radiation. Different
materials have different optimal temperature ranges for accurate
aging simulation. So, setting the appropriate temperature according
to the material being tested is vital for obtaining valid results.
3. Are there any limitations to using an ultraviolet aging test
chamber?
Although it is a powerful tool, it has some limitations. It can
only simulate certain aspects of real - world exposure, and not all
environmental factors can be fully replicated. Also, the
accelerated aging process may not always perfectly match the
natural aging behavior of materials over extremely long periods.
Additionally, the test results may vary depending on the specific
model and calibration of the chamber. prevent overheating and
potential damage to the equipment.ely simple operation interfaces, it's still advisable to receive
proper training. Understanding how to set the correct test
parameters, handle the materials during testing, and interpret the results accurately
is crucial. Specialized training can also help in troubleshooting
common issues and ensuring the safe and efficient operation of the
chamber.ound the world in the near future.
