Dockside Marine Airbag for Loading
Product Concept
The dockside marine airbag for loading was conceived with the aim
of revolutionizing the traditional loading processes in the
maritime domain. In the past, loading operations in the
shipbuilding, ship repair, and cargo handling sectors faced
numerous challenges. Manual labor was often strenuous and time -
consuming, while the use of heavy - duty machinery was not only
expensive but also carried high risks of damage to both the cargo
and the loading infrastructure.
The concept behind this innovative product is centered around
providing a flexible, safe, and cost - effective alternative. By
harnessing the power of air - filled structures, the airbags are
designed to distribute the weight of heavy loads evenly. This not
only reduces the stress on the cargo during movement but also
minimizes the potential for accidental drops or collisions.
The adaptability of the dockside marine airbag for loading is a core part of its concept. It can be adjusted to fit different
sizes and shapes of cargo, whether it's a small, irregularly -
shaped component or a large, bulky vessel. This versatility allows
for seamless integration into various loading scenarios,
eliminating the need for multiple specialized handling equipment.
Specific Instructions For The Application Of Airbags
I.Marine Rubber Airbags for ship launching
Now more and more shipyard choose Luhang dockside marine airbag for loading, we continue to innovate and improve the application methods. Take
an ordinary medium-sized ship as an example:
1. Preparation:
a. Calculate carefully, prepare enough airbags (check rubber
airbags by 1.25 working pressure without load,confirm no air
leakage), traction winches, air compressors.
b. Build &Clean up the road:The ramp need be flat,need a enough
depth and length in water, confirm there is no Sharp object to
prevent airbags be piercedc.
c. Grind the burrs at the bottom of ship to be smoothd.
d. Close the sea valve, fix rudder, propeller
2. Working process:
a. link ship and traction winches by wire rope.
b. Put and inflate rubber airbags under the ship,use dockside marine airbags for loading to support the ship weight, then remove the blocks.
Depending on the size and shape of a ship, the ship may be launched
by the end launching method.There are three ways to arrange airbags
when using the end launching method:
Single row arrangement
Cross over arrangement
Two row arrangement
c. Adjust the internal pressure of rubber airbags,reduce the ship
height to a suitable working height to keep the ship Steady
progressd.
d.Put 2 or 3 rubber airbags on the black area nearby the ship.
e. Active traction winches,release wire rope slowly,keep ship move
slowly.
f. When the airbags separate from the bottom of bow,move them to
the front of the ship moving direction.
g. Repeat f work until the ship nearby seawater.
h. Notify people in danger areas to evacuate,the workers on ship
prepare to release the hauling of ship by winch when the ship enter
deep seawater.
i. Collect and clean rubber airbags,storage after dry.
II. Marine Airbags for ship docking
1.Preparation:
a. Calculate carefully, prepare enough airbags(check rubber airbags
by 1.25 workingpressure without load,confirm no air leakage),
traction winches, air compressors.
b. Build &Clean up the road:The ramp need be flat,need a enough
depth and lengthin water, confirm there is no Sharp object to
prevent airbags be pierced
2.Working process:
a. link ship and traction winches by wire rope.
b. Put and inflate airbags under the ship to lift the ship,put
airbags as calculated width on the road. I ship reach the repair
place.
c. Active traction winches,recycle wire rope slowly, keep ship move
slowly unti support the ship.
d. Work with the jack to lift ship to a height, then arrange blocks
instead of airbags to support the ship.
e. Collect and clean dockside marine airbags for loading, storage after dry.
III. Rubber Airbags for Heavy Object transportation
instrutions of application (the same with I marine airbags for ship
launching)
Technical Services Of Luhang Team
Luhang team have Rich experience of ship launching by dockside marine airbag for loading successfully,and keep do technology research. Especially for the
big ship launching,must choose good team to supply the most safety
plan according to the shipyard environment.
Technical services and support:
A. Preliminary discus sion to understand project needs (vessel
specs & diagrams, as wellas environmental factors like slipway
conditions, tide etc)
B. Site visit to inspect limitations of slipway and environment
C. Supply whole set of required equipments.
D. Discussion & training to help clients' operations team:
Understand operations procedure and execute according to plan
Commissioning & operate supplied product equipments
Understand & manage potential risks
Implement safety factors & precautions
Maintenance & storage best practices to prolong products' lifespan
Feedback post-mortem discussion to fine-tune operations for greater
efficiency forthe next project
E. On-site consultation services during project operations.
F. Contracted ship launching project by rubber airbags.
Company Introduction
